Microlife BP 3BTO-AP Инструкция по эксплуатации онлайн [11/48] 72599

pulse irregularity was detected during the measurement. Please

refer to item 2.4. of this manual and consult your doctor with the

related information.

f) The measurement readings remain on the display until you

switch off the instrument. If no button is pressed for a period of

5 minutes the instrument switches itself off in order to preserve

the batteries.

5.5. Discontinuing a measurement

If it is necessary to interrupt a blood pressure measurement for any

reason (e.g. the patient feels unwell), the START button can be

pressed at any time.

The device immediately lowers the cuff pressure automatically.

5.6. Memory - recall of measurements

This blood-pressure monitor automatically stores the last

99 measurement values. By pressing the «M» button, the

last Measurement, as well as previous measurements can

be displayed one after the other.

(MR30: Value of the last measurement) (MR29: Value of the measurement before MR 30)

5.7. Memory– cancellation of all measurements

Attention! Before you delete all readings stored in the

memory, make sure you will not need refer to the readings

at a later date. Keeping a written record is prudent and

may provide additional information for your doctor’s visit.

In order to delete all stored readings, depress the «M»

button for at least 7 seconds, the display will show the

symbol «CL» and 3 short beep sounds will be heard to

indicate deletion of stored readings.

6. ERROR MESSAGES/MALFUNCTIONS

If an error occurs during a measurement, the measurement is

discontinued and a corresponding error code is displayed.

(Example Error no. 1)

mmHg