Microlife BP 2BI0 Инструкция по эксплуатации онлайн [12/38] 72611
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Microlife BP 2BI0 Инструкция по эксплуатации онлайн [12/38] 72611

Microlife BP 2BI0 Инструкция по эксплуатации онлайн [12/38] 72611
Other possible malfunctions and their elimination
If problems occur when using the device, the following points should be checked and if necessary, the
corresponding measures are to be taken:
☞ Further information
The level of blood-pressure is subject to fluctuations even with healthy people. Important thereby is, that
comparable measurements always require the same conditions (rest conditions)!
You must consult your specialist dealer or chemist if there are technical problems with the blood-pressure
instrument. Never attempt to repair the instrument yourself!
Any unauthorised opening of the instrument invalidates all guarantee claims!
7. Care and maintenance, recalibration
a) Do not expose the device to either extreme temperatures, humidity, dust or direct sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle this carefully and avoid all types of straining
through twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not use petrol, thinners or similar solvent. Spots on the cuff
can be removed carefully with a damp cloth and soapsuds. The cuff must not be washed!
d) Handle the tube carefully. Do not pull on it. Likewise, this is not to be buckled or laid over sharp edges.
e) Do not drop the instrument or threat it roughly in any way. Avoid strong vibrations.
f) Never open the device! Otherwise the manufacturer calibration becomes invalid!
Periodical recalibration
9
Malfunction Remedy
The display remains empty when the
instrument is switched on although the
batteries are in place.
1. Check whether the batteries are installed with the correct
polarity and correct if necessary.
2. If the display is unusual, re-insert batteries or exchange them.
The pressure does not rise although the
pump is running.
• Check the connection of the cuff tube and connect properly if
necessary.
The device frequently fails to measure
the blood pressure values, or the values
measured are too low (too high).
1. Fit the cuff correctly on the arm.
2. Before starting the measurement make sure that the cuff is
not fitted too tightly and that there is no rolled-up sleeve
exerting pressure on the arm above the measuring position.
Take off articles of clothing if necessary.
3. Measure the blood pressure again in complete peace and quiet.
Every measurement results in different
values although the device functions
normally and the values displayed.
• Please read the following information and the points listed
under «Common sources of error». Repeat the measurement.
The blood pressure values measured
differ from those measured by the doctor.
• Record the daily development of the values and consult your
doctor about them.

Содержание

Похожие устройства

Скачать