Korting HG995CTX [29/32] Technical service and spare parts

Enameled hobs.

All the enameled parts must be cleaned with a sponge and soapy water or specific detergents.

Rinse and dry the hob carefully after cleaning.

Stainless Steel hobs.

The stainless steel hobs should be cleaned with damp cloth and special detergents available in commerce.

Rinse and dry the hob carefully after cleaning. It is recommended to use a chamois leather to dry the hob.

Grids.

Remove the grids from the hob in order to clean them. Use soapy water or a specific detergent and a damp

cloth.

The enameled grids can be washed in the dishwasher.

Burners.

The burners, comprising 2 parts, can be removed and cleaned using suitable detergents.

After cleaning, dry the burners carefully, and replace them in their original seats.

For models with electric ignition, always check that the electrode “E” is clean.

See figure 12 below.

In models with safety device, clean the thermocouple “T”

(figure 12) in order to allow regular operation of

the safety valve.

Figure 12

TECHNICAL SERVICE AND SPARE PARTS

Repairs must only be carried out by authorized personnel, especially on the electrical parts. It is

recommended to contact an Authorized Service Centre, indicating the type of fault, appliance model and

serial number located on the appliance data plate.

The plate is located on the bottom of the appliance.

For all repairs only original spare parts must be used.

The original spare parts, certified by the manufacturer, can be found only at the Authorized Service Centre

and in Authorized Spare Parts Stores.