Bomann KA 1367 [30/60] Operation

Bomann KA 1367 [30/60] Operation
30
Electric Connection
1. Ensure that your mains power corresponds with the speci-
cations of the appliance. The specications are printed on
the type label.
2. Connect the mains cable to a properly installed and earthed
wall outlet.
Button functions
ON/OFF Pressing once: Turn on the device, the button
will light up red, immediate
brewing process;
Pressing twice: TIMER mode, the button will
blink blue, brewing process will
start at the programmed time.
Pressing 3 times:
Turning off device; button will still
light up blue for ca. 15 seconds
before the device is shut off.
PROG Pressing once: Setting of the current time;
Pressing twice: Adjustment of the start time;
query of the adjusted start time;
the button will light up blue for ca. 15 seconds
afterwards.
HOUR Hour
MIN Minute
Operation
Before making coffee for the rst time operate the appliance
twice with clean water only and without paper lter. This re-
moves dust, which may have collected during transport. Follow
the instructions given under “Switching on the coffee machine
directly”.
Operation
Set the time
The device works in the 24-hour mode. The time “12:00” is
preset.
Press the PROG button one time. “CLOCK” will appear above
the time in the display.
Set hours: Press the HOUR button.
Set minutes: Press the MIN button.
Leaving the
setting mode:
Wait ca. 15 seconds after the last push
of a button. The light of the respective
button and the notication “CLOCK” in
the display will go out.
Preparing the Coffee Machine
1. Open the lid of the water tank.
2. Fill cold water according to the desired amount of cups of
coffee into the rear water tank. The water level is displayed
on the indicator.
NOTE:
You can use the pot to ll the water tank.
CAUTION:
Do not overll the tank! Do not ll it above the 15 mark.
3. Ensure that the lter holder is properly attached.
4. Turn over the lower fold of the paper lter (size 1x4) and
place it in the lter funnel. Then ll it with coffee powder.
5. Now close the lid of the water tank.
6. Place the jug onto the warming plate.
CAUTION: Drip stop
Your appliance comes with a drip stop. It closes when
removing the coffee pot. This prevents the coffee from
dripping onto the warming plate if there is still water in the
lter.
Ensure that the lid is attached to the coffee pot. It
opens the drip stop.
If there is still water in the tank, place the pot under-
neath sa soon as possible. Otherwise the lter might
overow.
Switching on the coffee machine directly:
Please follow the instructions under points “Preparing the Cof-
fee Machine”.
7. Press the ON/OFF button once. The ON/OFF button lights
up red. The appliance is operational.
NOTE:
The unit switches off automatically about 2 hours
after the brewing. The ON/OFF button indicator lamp
turns off.
If you yourself would like to shut off the device
beforehand, press the ON/OFF button twice. The
light of the button will go out after ca. 15 seconds.
Automatic operation:
Please follow the instructions under points “Preparing the Cof-
fee Machine”.
7. Press the PROG button twice. “TIMER” will appear above
the time in the display.
8. Set start time:
Set hours: Press the HOUR button.
Set minutes: Press the MIN button.
Leaving the
setting mode:
Wait ca. 15 seconds after the last push
of a button. The light of the respective
button and the notication “TIMER” in
the display will go out.

Содержание

Скачать
Случайные обсуждения

Ответы 0

ИНСИРУКЦИЯ
2 года назад