Bomann HM 334 [8/26] Cleaning

Initial Operation

Ensure that the machine is not connected to the mains.

Assembly of the Whisk/Kneading Hook/Beater

• Press the two whisks or kneading hooks on the bottom by turning slightly until

they lock in place.

Note:

The kneading hook/whisk must be inserted into the correct opening of the mixer!

Using the Machine

1. Please ensure that the speed switch (2) is turned to "0/OFF".

2. Connect the mixer to a properly installed power socket, 230 V, 50 Hz.

3. Insert the kneading hook or whisk into the food to be mixed.

Set the desired speed with the speed switch (2):

1. Kneading hook: butter, potatoes, light mixture

2. Whisk: sauces, milk mix, etc., desserts, pudding, egg white,

frothy cream.

4. Tilt the machine slightly up and down.

Note: For optimum results use high-walled vessels that are not too large.

Turbo Switch (1)

This is for switching to maximum speed for a short time. Press at short intervals for

pulsed mode operation.

WARNING: Do not use this function for more than 2 minutes!

Releasing the kneading hook / whisk

In order to release the hook, press the release button (3).

Cleaning

• Disconnect the machine from the mains.

• Clean the machine after use with a dry cloth.

• Clean the equipment in the usual way in soapy water.

This device has been tested according to all relevant current CE guidelines,

such as electromagnetic compatibility and low voltage directives, and has been

constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

5....-05-HM 334 Top Edition 06.10.2003 12:05 Uhr Seite 8