Bomann HT 897 CB [32/52] Cleaning and care

Special safety instructions for this device

Symbols on the Product

On the products you will ﬁ nd symbols that indicate warnings or provide information:

Warning of electric shock!

Do not use this device near baths, wash basins or other

vessels containing water.

• Warning: The nozzles become hot during operation.

• If the hair dryer is used in the bathroom, remove the mains plug after use as water

represents a hazard. This also applies when the hair dryer is switched off.

• Do not put objects, hair or your hands in front of the air intake opening! The device can

suffer damage despite the overheating protection if the airﬂ ow is blocked!

• Please ensure that the inlet grille remains free of ﬂ uff and hairs. Danger of ﬁ re!

• As additional protection we recommend the installation of a fault current protection

device (RCD) with a rated current of not more than 30 mA in the wiring system of the

bathroom. Please contact an authorised electrician for advice.

Neu.indd 325-HT 897CB Neu.indd 32 01.12.2008 12:04:57 Uhr01.12.2008 12:04:57 Uhr

Commissioning

1. Fully unwind the mains cable.

2. Make sure that the iron voltage (see name plate) and the mains voltage match.

3. Insert the plug into a duly installed 230V/50Hz protective contact socket.

4. Shift the switch on the handle to one of the desired heat/blowing levels:

Level 0: off

Level 1: medium airﬂ ow and medium temperature

Level 2: strong airﬂ ow and high temperature

Switch-off

• After use shift the switch to position „0“ and pull out the plug. Leave the device to cool

before putting it away!

• To this purpose you can place the device on one of the rubberised sides of the housing

• Store the device in the see-through bag.

Cleaning and care

• Before cleaning remove the mains lead from the socket.

• Clean the housing with a soft, dry cloth without additives.

• The device must never be immersed in water!