Delonghi EOA1165.W [14/16] How to operate the convection oven

Delonghi EOA1165.W [14/16] How to operate the convection oven
8
9
en
how to operate the convection oven
1. Place either the low or the dual rack inside the glass bowl
of the oven as illustrated in Fig.5.
Please note: For cooking multiple items you may use
both racks and extender ring at the same time.
Fig.5
2. Secure the lid on glass bowl.
Please note: The lid works as a safety mechanism, lid
must be pushed to the horizontal position to turn oven on.
When lid is in vertical position, oven is o.
3. Plug the power cord into an electrical outlet. Turn on the
power switch at the back of unit as illustrated in Fig.6.
Please note: When the power is turned on, all indicating
lights on the control panel will light up 2 seconds and then tur-
ned o entering into sleep mode. Press any key to wake up the
unit from sleep mode.
Fig.6
4. If preheat is required in the recipe, follow this procedure:
Press the “PRE HEAT” button. This will cause the oven to
operate at its highest temperature and fan speed for 6
minutes. Preheating is complete when the timer reaches
“0:00” and the fan light ashes. Press the “+” button to
increase the preheating time, if needed.
Please note: Always preheat the oven before cooking
because preheat can make cooking faster and more evenly.
5. Place food directly on rack, allow sucient space betwe-
en the food and the heating element so that the food
can’t burn or catch re. Close the lid.
6. Time Selection: press the up or down arrow lightly to
raise or lower the time selected in increments of 1 minute
upto9hoursand59minutes.Holdinganarrowbutton
down will cause the increment more quickly.
7. Temperature Selection: Press the “TEMP °C” button
gently to move the temperature selector through the
temperatures one at a time from left to right. A light will
indicate the selected temperature. Once 260°C is reached
the cycle will start all over again at 65°C (Wash).
8. Fan Speed Selection: Press the “SPEED button to
change the fan speed. The indicator light will move from
“MAX” to “MIN” setting. “MAX fan speed (recommended)
helps the food cook faster, and improves browning. For
slower cooking you may use “MIN” fan speed.
Please note: Function indicator light will blink as soon
as a function is selected. However the oven does not start its
operation until the “START/PRE SET” button is pressed.
9. Clear Selection: Press the “CANCEL bouton to reset all
functions. The timer will be reset to “0:00”, temperature
indicator switched to 65°C (Wash) and fan speed indica-
tor light switched to MAX”.
10. To begin cooking, press the “START/PRE SET” button. The
oven starts cooking.
Please note: The unit will not operate unless time and
temperature are set and the lid is down.
Please note: When the oven temperature reaches the
selected temperature during cooking cycle the heating ele-
ment (halogen bulb) will shut o. However, when the oven
temperature drops below the selected temperature, the hea-
ting element will automatically go ON again. This is a normal
phenomenon.
11 . When the cooking cycle is nished and the oven will beep
6 times.
Please note: After the procedure is over, If the oven
temperature is over default temperature, the fan will continue
to operate to allow the heating element to cool until the oven
temperature drops down to default temperature, the fan will
stop operating.
Pause cooking: Before setting time is up, user can pause
operation by simply opening the lid and resume cooking by

Содержание

Скачать
Случайные обсуждения