DOD MyCam2 [8/76] Camera setup installation usage

INSTALLATION

Connecting the camera

Using a standard Ethernet network cable, connect the camera to your network (depending on your own

setup, this may be to your router or switch). see figure below

Connect the included power adapter to the power port on the camera and the other end into an electrical

socket. see figure below

Check that the power indicator is lit on the front of the camera.

Note:

Please handle the power adapter carefully to avoid the risk of accidental electric shock.

Camera Setup Installation & Usage

The camera Setup utility can easily and quickly detect cameras connected to your local network and list

them on the Camera Setup window, also you can use the camera Setup utility to assign an IP address to

each camera.

1. Insert the Installation CD into your CD-ROM drive and the installation screen should appear automatically

(See image below). If it does not, click “Start” then “Run”. In the text field enter “D:\autorun.exe” (if “D:” is the

letter of your CD-ROM Drive)