Haier HM-09CA03/R1 [11/14] Power failure resumption function

Содержание

Usage 7 Water full alarm function During cooling and dehumidifying operation condensed water will accumulate in the water tank When the tank is full the WATER FULL indicator will turns on and the water pump inside the air conditioner begins to drain water Upon finishing of drainage the WATER FULL indicator will turn off Note Once starting the water pump will operate for at least 20 sec If the water tank is still full after 60 sec operation of water pump WATER FULL indicator begins to flash at the same time the buzzer beeps 3 times and the compressor stops Then the power shall be disconnected and the rubber plug at the bottom of the unit shall be removed After finishing water drainage replace the rubber plug switch on the unit again The unit will resume normal operation 8 Power failure resumption function If sudden power failure occurs during normal operation of mobile air conditioner when power is resumed next time the air conditioner will restore the original operating conditions during timer mode power failure resumption function is not available 9 3 min protection function of compressor 1 The compressor is permitted to restart only 3 min after it stops 2 If to switch on the unit after it stops the compressor will only restart in 3 min to protect itself from being damaged 10 Air purifying function The mobile air conditioner has an air filter at the air inlet grill which could get rid of the impurities in the air such as dust etc Air inlet grill 9

Скачать