Karcher K 2.16 [13/184] Storage

Karcher K 2.16 [13/184] Storage
- 6
Caution
Dry runs lasting longer than two minutes lead to
damages to the high pressure pump. If the appli-
ance does not build up pressure within two min-
utes, switch it off and proceed as instructed in
the Chapter "Troubleshooting".
Î Connect the high pressure hose to the high
pressure connection of the appliance.
Î Push the spray lance into the trigger gun and
fasten it by turning it through 90°.
Î Completely open the water tap.
Î Insert the mains plug into the socket.
Î Turn on the appliance “I/ON”.
Danger
The trigger gun is subjected to a recoil force
when the water jet is discharged. Make sure that
you have a firm footing and are also holding the
trigger gun and spray lance firmly.
Î Unlock the lever on the trigger gun.
Î Pull on the lever of the trigger gun; the device
will switch on.
Note: Release the lever of the trigger gun; the
device will switch off again. High pressure re-
mains in the system.
For normal cleaning tasks.
Not suitable for use with detergents.
For particularly dirty items or areas.
Not suitable for use with detergents.
Suitable for use with detergents.
Please use exclusively KÄRCHER detergents and
care products to carry out the respective cleaning
task, as these were specifically developped for
your appliance. The use of other detergents and
care products may lead to premature wear and can
invalidate your warranty claims. Please obtain in-
formation at your local dealer or request informa-
tion directly from KÄRCHER.
Î Detach spray lance from the trigger gun. Work
only with the trigger gun.
Î Suspend end of detergent suction hose in a
container filled with detergent.
Î Spray the detergent sparingly on the dry surface
and allow it to react, but not to dry.
Î Spray off loosened dirt with the high-pressure jet.
Î Release the lever on the trigger gun.
Î Lock the lever on the trigger gun.
Î During longer breaks (more than 5 minutes), also
turn the appliance off using the "0/OFF" switch.
Caution
Only separate the high-pressure hose from the
trigger gun or the appliance while there is no
pressure in the system.
Î After working with detergent, suspend deter-
gent suction hose in a container filled with clear
water, switch the appliance on for around 1
minute once the spray lance has been re-
moved and rinse until water runs clear.
Î Release the lever on the trigger gun.
Î Turn off the appliance "0/OFF".
Î Turn off tap.
Î Detach the appliance from the water supply.
Î Press the lever on the trigger gun to release
any remaining pressure in the system.
Î Lock the lever on the trigger gun.
Î Pull out the mains plug.
Î Illustration
Stow away the mains cable, the high-pres-
sure hose and accessory at the appliance.
Caution
In order to prevent accidents or injuries, keep in
mind the weight of the appliance during transport
(see Specifications).
Î Lift appliance by the carrying handle and car-
ry it.
Î Secure the appliance against shifting and
tipping over.
Caution
In order to prevent accidents or injuries, keep in
mind the weight of the appliance when selecting
a storage location for it (see Specifications).
Start up
Operation
Spray lance with high pressure nozzle
Spray lance with Dirtblaster
Washing brush
Working with detergent
Recommended cleaning method
Interrupting operation
Finish operation
Transport
When transporting by hand
When transporting in vehicles
Storage
13EN

Содержание

Скачать
Случайные обсуждения

Ответы 1

Как пользоваться шампунем
4 года назад