Haier HWM90-1678T [8/20] Installation adjustment

Installation & Adjustment

Usage of the drain hose

Inlet pipe connection

●

1.The height of the drain hose shall be less

than 10cm, or the drainage will not be

smooth and cost such long time that the

machine may stop at mid way.

2.Do not trample or press the drain hose.

3.If the drain hose is too long, cut it at mid

point. To make smooth drainage,cut the

front end of the hose slantingly.

4.If extra drain hose is needed, please

make separate purchase.The inner

diameter of the extra hose shall not be

less than 30mm,and the length shall

not exceed 1.5m.

5.If the extra hose is too long, cut it either

at A or at B point.

Note: The instructions for appliances connected to the water mains by detachable

hose-sets shall state that the new hose-sets supplied with the appliance are to

be used and that old hose-sets should not be reused.

The new hose-sets supplied with the appliance are to be used and that old hose-sets

should not be reused.

Confirm the water faucet

●

It is required that the front end shall be longer than 10mm.

●

The exit end face of the faucet shall be flat and smooth. If not, please file it to avoid

leakage.

The exit end face of the faucet

water faucet,suitable water faucet, not suitable

The drainage shall be smooth with the drain hose.