Sven MS-1085 G [18/20] Multimedia speaker system

you want - we can

ENG

2.1 Multimedia Speaker System

Fig. 2. Connection diagram

6. LOCATING

• Place the satellites symmetrically to the listeners at least than one meter away.

• Place the MSS far away from TV sets as picture distortion in supersensitive monitors and TV sets is

possible.

7. INSTALLATION AND OPERATION GUIDE

WARNING! All the components should be switched off before connection.

• Connect the subwoofer and the satellites (see Fig. 2).

• Plug the mini-jack of the signal cable (2RCA to mini-jack) into a Ø 3.5 mm LINE OUT port of the computer

sound card or an audio output of your CD/MP3 player, then insert the 2RCA-jacks of the signal cable into

the subwoofer input connector (INPUT). Note that the white RCA-jack must be connected to the white

subwoofer terminal and the red RCA-jack – to the red subwoofer terminal.

• Plug the power cord i into a mains outlet.

• Set the volume control knob f to its minimum by turning knob f counterclockwise until it stops,

switch on the device with POWER e switch on the subwoofer rear panel.

• Set the required volume with the volume control knob on the wired remote control.

• Keep the subwoofer volume control knob in mid position.

• Use the soundcard Line-Out port to improve sound quality.