Home
Главная
Brayer
Гриль
BR2006
Инструкция по эксплуатации Страница: 10

Brayer BR2006 Инструкция по эксплуатации онлайн [10/48] 624997

Note: if no action is taken before turning the grill o󰀨

with the « » button (9), in this case the grill will be

automatically turned o󰀨 after 60 minutes.

Using the grill as a cooking unit (pic. 3)

• You can use the grill as a at frying surface.

• Before connecting the power plug to the mains

socket open the grill. To do this, take the handle (3)

and lift the upper part of the grill.

• Press the button (4) «180°» and open the grill

completely.

• Connect the power plug to a socket, turn the grill

on by pressing the «

» button (9), press the « »

button and using the « , » buttons set the required

operating surfaces (7) heating temperature, press

the « » button again and set the required notication

time with the « , » buttons.

• • Wait for the working surfaces (7) to heat, and the

digital temperature symbols on the display (12) will

light constantly.

• Carefully put the products on the frying plates, avoid

burns by possible splashes of juice or fat dripping

from the products.

• Put the prepared products into an appropriate dish;

use wooden or heat-resistant plastic kitchen tools to

remove the products.

• To turn the grill o󰀨, press and hold the « » button

(9), disconnect the power plug from the socket.

• Wait until the grill cools down completely, then lift the

upper part of the grill, press the button (4) «180°»

and fold the upper and the lower (1) parts together.

• To x the lower and the upper parts of the grill set the

lock (5) handle to the position «Lock».

MALFUNCTION SYMBOLS

• In case of malfunction a sound signal will be heard,

the quickly ashing symbols «ER 1», «ER 2» or «ER

3» will be shown the display (12), the buttons on the

control panel (8) will be inactive.

1. In case of the temperature sensor malfunction or

breakdown, after the grill has been operating for 2

minutes 40 seconds, the display (12) will show a

quickly ashing symbol «ER 1» (Fig. 4), the display

illumination (12) will be on, and a sound signal will

be heard, the buttons on the control panel (8) will

be inactive.

2. If the temperature sensor malfunction is revealed

during the grill operation, the unit will run for 5

minutes, when the operating surfaces (7) cool

below 20°C, the display (12) will show the «ER 2»

symbol (Fig. 5).

3. If the operating surfaces (7) temperature exceeds

320°C, the display (12) will show a quickly ashing

symbol «ER 3» (Fig. 5), the display illumination (12)

will be on, and a sound signal will be heard, the

buttons on the control panel (8) will be inactive.

Brayer BR2006 Инструкция по эксплуатации онлайн [10/48] 624997

Содержание

Похожие устройства