Brayer BR2006 [7/48] Before the first use

Brayer BR2006 [7/48] Before the first use
7
EN
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
Unpack the unit and remove all the packaging
materials.
Keep the original package.
Read the safety measures and operating
recommendations.
Check the delivery set.
Examine the unit for damages, in case of damage do
not plug it into the mains.
Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains.
Clean the grill body surface with a slightly damp cloth
and then wipe it dry.
Move the lock (5) to the position «Open», take the
handle (3) and open the grill.
Remove the upper frying plate by pressing on the
lock (2) «RELEASE».
Remove the lower frying plate by pressing on the
lock (1) «RELEASE».
Remove the tray (6).
Wash the frying plates (7) and the tray (6) with warm
water and neutral detergent, rinse them and wipe dry.
Install the surfaces (7) back to their places, to do this,
match the ledges on the unit body with the grooves in
the lower part of the plates (7) and then lift the upper
plate and move down the lower plate until the locks
(1, 2) «RELEASE» clicking. Make sure that the plates
(7) are xed.
Place the grill keeping at least a 20 cm gap between
the grill body and the walls and 60 cm of space
above the grill.
Use the grill on a at steady surface, away from
sources of moisture,
heat and open ame with free access to the mains
socket.
Do not place and do not use the grill near highly
inammable objects
or liquids and objects subject to thermal deformation.
Use the unit in places with proper ventilation.
Make sure that the tray (6) is installed to its place.
Before using the grill open it and oil the frying plates
(7) slightly.
Close the grill.
Connect the power plug to a socket, a sound signal
will be heard, the button (9) illumination (10) will light
up, the display (12) will show the «OFF» symbols
(Fig. 1).
To turn the grill on press the «
» button (9), the
display will show the operation time - «00» minutes
and the ashing digital 90°C temperature symbols
(Fig. 2).
Скачать