Brayer BR2202 [6/46] Before the first use

Brayer BR2202 [6/46] Before the first use
6
EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
Unpack the unit and remove all the packaging
materials.
Keep the original package.
Read the safety measures and operating
recommendations.
Check the delivery set.
Examine the unit for damages, in case of damage do
not plug it into the mains.
Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains. When the unit is used in
the mains with 60 Hz frequency, it does not need any
additional settings.
Clean the unit body surface and the frying plates (5)
with a soft, slightly damp cloth, and then wipe it dry.
Install and use the unit on a at, dry, steady and
heat-resistant surface with free access to the mains
socket.
Use the unit in a well-ventilated room, for normal air
circulation the free space around the sandwich maker
should be at least 10-15 cm on each side.
Take the handle (1), lift the lock (2) and open the
sandwich maker.
Simultaneously press the locks (5) and remove the
lower frying plate, then remove the upper ying plate
in the similar manner by pressing the locks (6).
Wash all the frying plates (7, 8, 9) with warm water
and neutral detergent, rinse them and wipe dry.
Install the required frying plates (7, 8 or 9), to do
this insert the bottom part of the plate rst and then
press on the upper part of the plate until the lock (2)
clicking. Make sure that the frying plates (7, 8 or 9)
are xed properly.
Before the rst use smear some vegetable oil over
the frying plates (7, 8, 9).
Close the sandwich maker and insert the power cord
plug into the mains socket, the indicators (1) «pover»
will light up.
When the indicator (3) «ready» lights up, unplug
the sandwich maker and wait until it cools down
completely.
Take the handle (4), press the lock (2) button and
open the sandwich maker. Remove the remaining oil
from the frying plates (7, 8, 9) with a paper towel or
a clean cloth.
Notes:
- when you switch the unit on for the rst time, some
smoke or foreign odor may appear. It is normal