Home
Главная
Brayer
Кофеварка
BR1107
Инструкция по эксплуатации Страница: 11

Brayer BR1107 Инструкция по эксплуатации онлайн [11/76] 625011

Notes:

- if you need to switch the co󰀨ee maker o󰀨 during the

espresso making, press the «Espresso»-button (7)

again;

- successive making of co󰀨ee should be performed

with intervals 2-3 min.

• Remove the cup with ready drink from the grid (2 or 3).

• After you nish using the co󰀨ee maker, switch the

co󰀨ee maker o󰀨 by setting the switch (11) «0/I» to the

position «0».

• Wait until the co󰀨ee maker cools down, remove the

lter holder (18) and wash the installed lter (19 or 20).

ESPRESSO PORTION SETTING

• When making espresso, press and hold the button

(7) «

» for 3 seconds, the one cup indicator « » will

be ashing. When the desired amount of espresso is

dispensed, release the button (7). The maximal amount

of one cup of co󰀨ee is about 90 ml.

• Next time when you make espresso, the preset amount

of ready co󰀨ee will be poured into the cup.

• When making espresso, press twice and hold the

button (7) « » for 3 seconds, the two cups indicator

« » will be ashing. When the desired amount of

espresso is dispensed, release the button (7). Maximal

amount of double portion of co󰀨ee is about 130 ml.

• Next time when you make espresso, the preset amount

of ready co󰀨ee will be poured into the cup

Notes:

- minimal and maximal amount of espresso

are specied in the table «CHOOSING THE

APPROPRIATE CUP»;

- if you need to make a lesser amount of co󰀨ee then it

was set, press the button (7) again when the cup is

lled with necessary amount of ready co󰀨ee.

Return to the factory settings

• To return to the factory settings switch the co󰀨ee maker

o󰀨 by setting the switch (11) «0/I» to the position «0».

• Press and hold the button (5 7) «Espresso», switch the

co󰀨ee maker on by setting the power switch (8) «0/I»

to the position «I», the buttons «

» and « » indicators

will ash 5 times.

• The co󰀨ee maker is ready for operation with the factory

settings.

MAKING CAPPUCCINO

ATTENTION! When making cappuccino be careful to

avoid burns by outgoing hot steam.

• Make sure that the removable tray (1) and the tray grid

(2) are installed to their places.

• Fill the tank (10) with cold water, do not exceed the

maximal level mark, install the tank (10) back to its

place.

• Take the container (16), pull it towards yourself and

remove it (pic. 1), remove the cappuccinator lid (14)

from the container (16).

Brayer BR1107 Инструкция по эксплуатации онлайн [11/76] 625011

Содержание

Похожие устройства