Brayer BR1107 Инструкция по эксплуатации онлайн [12/76] 625011

Brayer BR1107 Инструкция по эксплуатации онлайн [12/76] 625011
12
EN
Fill the container (16) with milk, do not exceed the
maximal level mark.
Install the cappuccinator lid (14) on the container (16)
and install the cappuccinator back to the installation
place until the lock clicking.
Install one of the co󰀨ee lters (19 or 20) into the lter
holder (18) matching the ledge on the lter (19 or 20)
with the hole on the holder (18) and turn the lter (19 or
20) counter/clockwise.
Add the required amount of ground co󰀨ee into the lter
(19 or 20) with a measuring spoon (21) and slightly
tamp the co󰀨ee in the lter (19 or 20) with the back side
of the measuring spoon (21) (pic. 5, 6, 7).
Install the lter holder (18) into the installation place «
» and turn the handle (4) to the right as far as it will
go «
» (pic. 2, 3, 4).
Place a cup of suitable height and capacity on the grid
(2) (see the table «CHOOSING THE APPROPRIATE
CUP»).
Direct the cappuccinator pipe (13) into the cup using
the cappuccinator pipe angle adjustment bar (12).
Turn the frothed milk supply (intensity) control knob (15)
to the right (in this position it produces more frothed
milk). Turn the frothed milk supply (intensity) control
knob (15) to the left (in this position it produces less
frothed milk) (pic. 8, 9).
Notes: you can adjust the milk foam supply intensity when
making cappuccino.
Insert the power plug into the mains socket.
Switch the co󰀨ee maker on by setting the power switch
(11) «0/I» to the position «I», the indicator (5, 6, 7) will
light up and start ashing.
When the co󰀨ee maker is ready for operation, the light
indicator (5, 6, 7) will glow constantly.
To make one cup of cappuccino use a small lter (19)
and press the «Cappuccino»-button (6) once; the light
indicator «
» will light up.
To make two cups of cappuccino use a big lter (20)
and press the «Cappuccino»-button (6) twice; the light
indicator «
» will light up.
Note: if you need to switch the co󰀨ee maker o󰀨 during the
cappuccino making, press the button (6) «Cappuccino»
again.
Remove the cup with the ready drink from the grid (2).
After you nish using the co󰀨ee maker, switch the co󰀨ee
maker o󰀨 by setting the switch (11) «0/I» to the position
«0».
Wait until the co󰀨ee maker cools down, remove the lter
holder (18) and wash the lter (19 or 20).
If there is some milk left in the cappuccinator, remove
the cappuccinator and put it in the fridge (pic. 10). If
you used all the milk during the co󰀨ee making, it is
recommended to remove and wash the cappuccinator
(see the chapter «CAPPUCCINATOR CLEANING»).

Содержание