Home
Главная
Brayer
Кофеварка
BR1107
Инструкция по эксплуатации Страница: 13

Brayer BR1107 Инструкция по эксплуатации онлайн [13/76] 625011

MAKING LATTE

ATTENTION! When making latte be careful to avoid

burns by outgoing hot steam.

• Make sure that the removable tray (1) and the tray grid

(2) are installed to their places.

• Fill the tank (10) with cold water, do not exceed the

maximal level mark, install the tank (10) back to its

place.

• Take the container (16), pull it towards yourself and

remove it (pic. 1), remove the cappuccinator lid (14)

from the container (16).

• Fill the container (16) with milk, do not exceed the

maximal level mark.

• Install the cappuccinator lid (14) on the container (16)

and install the cappuccinator back to its place until the

lock clicking.

• Install one of the co󰀨ee lters (19 or 20) into the lter

holder (18) matching the ledge on the lter (19 or 20)

with the hole on the holder (18) and turn the lter (19 or

20) counter/clockwise.

• Add the required amount of ground co󰀨ee into the lter

(19 or 20) with a measuring spoon (21) and slightly

tamp the co󰀨ee in the lter (19 or 20) with the back side

of the measuring spoon (21) (pic. 5, 6, 7).

• Install the lter holder (18) into the installation place «

» and turn the handle (4) to the right as far as it will

go «

» (pic. 2, 3, 4).

• Place a cup of suitable height and capacity on the grid (2)

(see the table «CHOOSING THE APPROPRIATE CUP»).

• Direct the cappuccinator pipe (13) into the cup using the

cappuccinator pipe angle adjustment bar (12).

• Turn the frothed milk supply (intensity) control knob (15)

to the right (in this position it produces more frothed milk).

Turn the frothed milk supply (intensity) control knob (15)

to the left (in this position it produces less frothed milk)

(pic. 8, 9).

Notes: you can adjust the milk foam supply intensity when

making latte.

• Insert the power plug into the mains socket.

• Switch the co󰀨ee maker on by setting the power switch

(11) «0/I» to the position «I», the indicator (5, 6, 7) will light

up and start ashing.

• When the co󰀨ee maker is ready for operation, the light

indicator (5, 6, 7) will glow constantly.

• To make one cup of latte use a small lter (19) and press

the «Latte»-button (5) once; the light indicator «

» will

light up.

• To make two cups of latte use a big lter (20) and press

the «Latte»-button (5) twice; the light indicator «

» will

light up.

Note: if you need to switch the co󰀨ee maker o󰀨 during the

latte making, press the «Latte»-button (5) again.

• Remove the cup with the ready drink from the grid (2).

• After you nish using the co󰀨ee maker, switch the co󰀨ee

maker o󰀨 by setting the switch (11) «0/I» to the position

«0».

Brayer BR1107 Инструкция по эксплуатации онлайн [13/76] 625011

Содержание

Похожие устройства