Home
Главная
Brayer
Электрочайник
BR1015
Инструкция по эксплуатации Страница: 6

Brayer BR1015 [6/40] Before using the kettle

• Do not repair the unit by yourself. Do not disassemble

the unit by yourself, if any malfunction is detected, and

after it was dropped, unplug the unit and apply to the

service center.

• Transport the kettle in the original package.

• Keep the unit out of reach of children and disabled

persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL

OR LABORATORY PURPOSES.

BEFORE USING THE KETTLE

After unit transportation or storage at low

temperature, it is necessary to keep it for at least

three hours at room temperature.

• Unpack the kettle and remove all the packaging

materials.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the kettle for damages, in case of damage do

not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the lower panel of the unit or

the base correspond to the specications of your

mains. When using the kettle in the mains with 60

Hz frequency, the unit does not need any additional

settings.

• Wipe the base (4), the outer and inner surfaces of the

ask (2) with a clean, slightly damp cloth to remove dust.

ATTENTION! Be careful while handling the kettle, glass

ask can break when the kettle is dropped or hit against a

solid object.

• Place the base (4) on a solid steady at and non-slip

non-metal surface away from heat sources as far as

possible from the edge of the surface.

• Do not place and do not use the kettle in closed space,

for example, in the cupboard or in closed structures —

this can lead to its breakage, cause harm to the user or

damage to his/her property.

• Take the handle (10), pull it upwards and remove the lid

(9).

• Remove the tea infuser (7) from the lid (9). To do this,

move the tea infuser (7) to the holder-free side.

• Wipe the lid (9) and wash the tea infuser (7) with the

neutral detergent solution, rinse and dry.

• Wash the ask (5) with neutral detergents, rinse and

dry. Wipe the outer surface of the ask (5) with a slightly

damp cloth and then wipe it dry. Do not use abrasives

and coarse scourers for this.

• Before connecting the kettle, make sure that there are no

moisture drops on the base (4), the ask (5), the power

cord and the power plug.

• Fill the kettle with water up to the «MAX» mark (6),

according to the scale situated on the outer surface of

the ask (5).

Brayer BR1015 [6/40] Before using the kettle

Содержание

Похожие устройства