Home
Главная
Brayer
Электрочайник
BR1015
Инструкция по эксплуатации Страница: 9

Brayer BR1015 [9/40] Cleaning and maintenance

kettle with water and switch it on, the electric kettle will

operate in normal mode.

MAKING TEA

• Take the handle (10), pull it upwards and remove the

lid (9).

• Put the necessary amount of tea leaves in the tea

infuser (7) and install the tea infuser (7) in the inner

surface of the lid (9), make sure that the tea infuser (7)

is xed properly.

• Fill the kettle with water not below the mark «MIN» and

not above the maximal mark «MAX» on the scale (6).

• Press the button (2) «40-70-85-100°С» to select the

necessary water heating temperature for a particular

kind of tea (see the chapter «HEATING WATER UP TO

THE REQUIRED TEMPERATURE»).

• Switch the kettle on by pressing the «ON/OFF» button

(1).

• After the use wait until the kettle cools down, remove

the lid (9), remove the tea infuser (7) and wash the

tea infuser (7) under running water. Over time, a

dark coating may form on the tea infuser (7), you can

remove it with baking soda. Moisten a cloth with water,

sprinkle a small amount of baking soda on it and wipe

the tea infuser (7) from the outside and inside, after

removing the coating rinse the tea infuser (7) and dry.

CLEANING AND MAINTENANCE

• Before cleaning disconnect the kettle from the mains,

pour out water and let the kettle cool down.

• Wipe the base (4) and the outer surface of the ask (5)

with a slightly damp cloth, and then wipe the base (4)

and the ask (5) dry. Use soft detergents to remove dirt;

do not use metal sponges and abrasive detergents and

solvents.

• Do not immerse the electric kettle into water or any other

liquids, do not wash it in the dishwasher.

DESCALING

• Scale, appearing inside the ask (5), inuences the

water taste and disturbs the heat exchange between

water and the heating element and also creates a risk of

failure of the heating element, the burnout of the heating

element because of large amount of scale in the ask (5)

is not covered by warranty.

• To remove scale, you can use special scale-removing

agents, as well as household ones, for example, vinegar

or citric acid.

• To remove scale, ll the ask (5) with water one-third full

and boil it. Open the lid and add table vinegar (6-9%) to

the «MAX» mark, leave the liquid in the kettle for several

hours. After the scale dissolves, pour out the liquid and

rinse the ask (5) several times. To oust the smell of

vinegar, boil water several times.

• Dissolve 25 g of citric acid in 500 ml of hot water.

• Fill the kettle with the prepared solution and leave for

15-30 minutes.

• Pour out the liquid and rinse the ask (5) several times,

boil water several times.

Brayer BR1015 [9/40] Cleaning and maintenance

Содержание

Похожие устройства