Black & Decker DV7210N [6/12] Assembly
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Black & Decker DV7210N [6/12] Assembly

Black & Decker DV7210N [6/12] Assembly
6
ENGLISH
(Original instructions)
Features
This tool includes some or all of the following features.
1. On/off switch
2. Bowl release button
3. Charging indicator
4. Charging socket
5. Dust bowl
6. Nozzle
7. Extention tubes
8. Floor head
Fig. A
9. Quick clean lter housing
10. Filter
Installation
Wall Mounting (g. C)
The product can be attached to a wall to provide a convenient
storage and charging point for the appliance.
When xing to a wall, make sure that the xing method is
suitable for the wall type and is appropriate to the weight of
the appliance.
u Mark the location of the screw holes (within reach of an
electrical outlet for chargeing the vac while it is on the wall
bracket).
u Insert the charger cord into the curved slot in the wall
mount bracket leaving approximately 8-9 inches excess.
u Hang the appliance on the wall by placing the opening
on the base of the vac over the hooks in the wall mount
bracket.
Assembly
Accessories (g. B)
These models may be supplied with some of the following
accessories:
u Extention tubes (7).
u Floor head (8).
Fitting the tubes and oor head (Fig. B).
u Fit the extention tubes (7) together.
u Fit the oor head (8) into the wide end of the extention
tubes.
u Fit the narrow end of the extention tubes (7) into the appli-
ance.
u Alternatively, to use as a hand-held cleaner with brush on
stairs and furniture, t the oor head (8) directly into the
appliance.
Use
u Before rst use, the battery must be charged for at least
24 hours.
Charging the battery (Fig. D)
u Make sure that the appliance is switched off. The battery
will not be charged with the on/off switch in the on posi-
tion.
u Plug the jack plug of the charger into the charging socket
(4) of the appliance.
u Plug in the charger. Switch on at the mains. The charging
indicator (3) will be lit.
u Leave the appliance to charge for at least 16 hours.
While charging, the charger may become warm. This is
normal and does not indicate a problem. The appliance can
be left connected to the charger indenitely. The charging
indicator (3) will be lit as long as the appliance is connected to
the plugged-in charger.
Warning! Do not charge the battery at ambient temperatures
below 4 °C or above 40 °C.
Switching on and off (g. E)
u To switch the appliance on, slide the on/off switch (1)
forward to position 1.
u To switch the appliance off, slide the on/off switch (1) back
to position 0.
Activating the brush (g. F)
Use the switches (11) on the oor head (8) to lower or raise
the bristles on the brush.
u Lower the bristles for cleaning carpets or rugs.
u Raise the bristles for cleaning hard oors, such as wood,
tile or marble.
Optimising the suction force
In order to keep the suction force optimised, the lters must be
cleared regularly during use.
Emptying and cleaning the product.
Quick empty the dust bowl (g. G).
u Press the release latchs (12) and pull the nozzle (6)
straight off.
u Empty the contents of the bowl.
u To replace the nozzle, place it back onto the handle until it
“clicks” rmly into position.

Содержание

Похожие устройства

Скачать