Citizen CL-E720DT [11/16] Cut settings

-11-

6. Cut settings

The auto-cutter-related commands are described below. See the Command

Reference manual for more details.

The following commands set the cut position and number of operations.

Cut-position setup command STX fnnn

This command species the distance between the sensor and the media cut

position.

Media-cut command STX o

This command executes one media-cut operation.

Software-switch setup command STX Vn

z This command temporarily selects the on/o state of the auto cutter or

the peeler, which are normally set in memory.

Examples:

n = 1: The auto cutter is set in the on state

n = 0: The auto cutter is set in the o state

Note

See the Command Reference manual for a detailed description of the

parameter n of the command.

Sheet-cutting interval command cnn (two-digit entry method)

:nnnn (four-digit entry method)

This command instructs the printer to cut the media after a specied number

of sheets have been printed.

Example: To set the sheet-cutting interval to 10 sheets

Two-digit data method

(Other label format commands) (Other label format commands)

Four-digit data method

X L

c10

STX L

：0010