![Citizen PMU2300II [2/454] Revision](/img/pdf.png)
Citizen PMU2300II [2/454] Revision
![Citizen PMU2300II [2/454] Revision](/views2/1844068/page2/bg2.png)
CITIZEN is a registered trade mark of CITIZEN HOLDINGS CO., LTD., Japan.
CITIZEN es una marca registrada de CITIZEN HOLDINGS CO., LTD., Japón.
REVISION
Rev No. Date Comment
0.00 2006/09/26 Newly issued
0.01 2006/11/22 Add program sample for FS p and FS q
0.02 2007/02/26 Revised page 153,155,159,169,205-207
0.03 2007/05/21 Supported CT-S310
0.04 2007/08/29 Supported PMU2XXX
0.05 2008/10/23 Supported PMU2XXXII, CT-S281
0.06 2009/07/31 Supported CT-S281 Label, CT-S801
0.07 2009/08/04 Errors in writing are corrected
0.08 2009/10/08
Add ｅｄ MSW4 - MSW10 to CT-S280.
0.09 2009/10/31 Supported CT-S601
0.10 2010/01/07 Supported CT-S851 and CT-S651
0.11 2010/02/15 Supported CT-P29x series
0.12 2010/08/23 Supported PMU2300III
PMU2xxx Type I, II and III are integrated as PMU series.
0.13 2011/02/23 Supported CT-S291
Model name descrition of CT-P29x series is changed
accordingly.
0.14 2011/03/25 Supported CT-S310II
GS1Databar is added.
0.15 2012/06/07 Changed CT-S281 GS FF command (added MSW5-6)
Содержание
- Command reference 1
- Rev no date comment 2
- Revision 2
- Control commands 3
- Esc pos 3
- Outline 3
- Table of contents 3
- Bitimagecommands 9 4
- Cuttercommands 37 4
- Linefeedspancommands 7 4
- Macrocommands 35 4
- Panelswitchcommands 34 4
- Paperdetectingcommands 32 4
- Printpositioncommands 4 4
- Statuscommands 04 4
- Barcodecommands 40 5
- Blackmarkcontrolcommands 80 5
- Commandsfornon volatilememory 50 5
- Kanjicontrolcommands 69 5
- Dimensionalcodecommands 10 6
- Gs dplphm a1b1 akbk 91 gs eplphfn 92 6
- Gs kplphcnfn parameter 10 6
- Gs kplphfnm 02 6
- Gs mplphfnm 06 6
- Gs nplphfnm 09 6
- Gsc n1 n2 n3 n4 n5 86 gsc 87 gsln1ln1hn2ln2h 88 gspn 89 fsff 90 6
- Printerfunctionsettingcommands 91 6
- Character code table 350 7
- Memory switch 378 7
- Appendix 35 8
- Pagemode 35 8
- Character set 9
- Characterset 9
- Citizen 9
- Control command details 9
- Control commands 9
- Controlcommanddetails 9
- Controlcommands 9
- How to send control commands 9
- Howtosendcontrolcommands 9
- Operation mode 9
- Operationmode 9
- Outline 9
- Command function mode gsp page 10
- Commands function mode gsp page 10
- Control commands 10
- Ct s280 10
- Esc pos command list 10
- Esc poscommand list 10
- Printcharacter ｃｏｍｍａｎｄｓ 10
- Printcontrol ｃｏｍｍａｎｄｓ 10
- Bitimagecommands 11
- Command function mode gsp page 11
- Linefeedspancommands 11
- Macrocommands 11
- Panelswitchcommands 11
- Paperdetectingcommands 11
- Printpositioncommands 11
- Statuscommands 11
- Barcodecommands 12
- Command function mode gsp page 12
- Commandsfornon volatilememory 12
- Kanjicontrolcommands 12
- Othercommands 12
- Printerfunctionsettingcommands 12
- Command function mode gsp page 13
- Commands function mode gsp page 13
- Ct s281 13
- Printcharactercommands 13
- Printcontrolcommands 13
- Printpositioncommands 13
- Barcodecommands 14
- Bitimagecommands 14
- Command function mode gsp page 14
- Commandsfornon volatilememory 14
- Cuttercommands 14
- Kanjicontrolcommands 14
- Linefeedspancommands 14
- Macrocommands 14
- Panelswitchcommands 14
- Paperdetectingcommands 14
- Statuscommands 14
- Blackmarkandlabelcontrolcommands 15
- Command function mode gsp page 15
- Dimensional code commands 15
- Othercommands 15
- Printerfunctionsettingcommands 15
- Command function mode gsp page 16
- Ct s300 16
- Printcharactercommands 16
- Printcontrolcommands 16
- Printpositioncommands 16
- Barcodecommands 17
- Bitimagecommands 17
- Command function mode gsp page 17
- Cuttercommands 17
- Linefeedspancommands 17
- Macrocommands 17
- Panelswitchcommands 17
- Paperdetectingcommands 17
- Statuscommands 17
- Blackmarkcontrolcommands 18
- Command function mode gsp page 18
- Commandsfornon volatilememory 18
- Kanjicontrolcommands 18
- Othercommands 18
- Printerfunctionsettingcommands 18
- Command function mode gsp page 19
- Ct s310 19
- Printcharactercommands 19
- Printcontrolcommands 19
- Printpositioncommands 19
- Barcodecommands 20
- Bitimagecommands 20
- Command function mode gsp page 20
- Cuttercommands 20
- Linefeedspancommands 20
- Macrocommands 20
- Panelswitchcommands 20
- Paperdetectingcommands 20
- Statuscommands 20
- Blackmarkcontrolcommands 21
- Command function mode gsp page 21
- Commandsfornon volatilememory 21
- Dimensional code commands 21
- Kanjicontrolcommands 21
- Othercommands 21
- Printerfunctionsettingcommands 21
- Command function mode gsp page 22
- Ct s310ii 22
- Printcharactercommands 22
- Printcontrolcommands 22
- Printpositioncommands 22
- Barcodecommands 23
- Bitimagecommands 23
- Command function mode gsp page 23
- Cuttercommands 23
- Linefeedspancommands 23
- Macrocommands 23
- Panelswitchcommands 23
- Paperdetectingcommands 23
- Statuscommands 23
- Command function mode gsp page 24
- Commandsfornon volatilememory 24
- Dimensional code commands 24
- Kanjicontrolcommands 24
- Printerfunctionsettingcommands 24
- Command function mode gsp page 25
- Othercommands 25
- Command function mode gsp page 26
- Ct s2000 26
- Printcharactercommands 26
- Printcontrolcommands 26
- Printpositioncommands 26
- Barcodecommands 27
- Bitimagecommands 27
- Command function mode gsp page 27
- Cuttercommands 27
- Linefeedspancommands 27
- Macrocommands 27
- Panelswitchcommands 27
- Paperdetectingcommands 27
- Statuscommands 27
- Blackmarkandlabelcontrolcommands 28
- Command function mode gsp page 28
- Commandsfornon volatilememory 28
- Dimensional code commands 28
- Kanjicontrolcommands 28
- Printerfunctionsettingcommands 28
- Command function mode gsp page 29
- Othercommands 29
- Command function mode gsp page 30
- Ct s4000 30
- Printcharactercommands 30
- Printcontrolcommands 30
- Printpositioncommands 30
- Barcodecommands 31
- Bitimagecommands 31
- Command function mode gsp page 31
- Cuttercommands 31
- Linefeedspancommands 31
- Macrocommands 31
- Panelswitchcommands 31
- Paperdetectingcommands 31
- Statuscommands 31
- Blackmarkandlabelcontrolcommands 32
- Command function mode gsp page 32
- Commandsfornon volatilememory 32
- Dimensional code commands 32
- Kanjicontrolcommands 32
- Printerfunctionsettingcommands 32
- Command function mode gsp page 33
- Othercommands 33
- Command function mode gsp page 34
- Ct s601 651 801 851 34
- Printcharactercommands 34
- Printcontrolcommands 34
- Printpositioncommands 34
- Barcodecommands 35
- Bitimagecommands 35
- Command function mode gsp page 35
- Cuttercommands 35
- Linefeedspancommands 35
- Macrocommands 35
- Panelswitchcommands 35
- Paperdetectingcommands 35
- Statuscommands 35
- Blackmarkandlabelcontrolcommands 36
- Command function mode gsp page 36
- Commandsfornon volatilememory 36
- Dimensional code commands 36
- Kanjicontrolcommands 36
- Printerfunctionsettingcommands 36
- Printing and feeding paper to manual cut position 36
- Command function mode gsp page 37
- Othercommands 37
- Bd2 2220 38
- Command function mode gsp page 38
- Linefeedspancommands 38
- Printcharactercommands 38
- Printcontrolcommands 38
- Printpositioncommands 38
- Barcodecommands 39
- Bitimagecommands 39
- Command function mode gs p page 39
- Command function mode gsp page 39
- Commandsfornon volatilememory 39
- Cuttercommands 39
- Macrocommands 39
- Panelswitchcommands 39
- Paperdetectingcommands 39
- Statuscommands 39
- Command function mode gsp page 40
- Kanjicontrolcommands 40
- Othercommands 40
- Printerfunctionsettingcommands 40
- Command function mode gsp page 41
- Pmu2xxx 41
- Printcharactercommands 41
- Printcontrolcommands 41
- Printpositioncommands 41
- Barcodecommands 42
- Bitimagecommands 42
- Command function mode gs p page 42
- Command function mode gsp page 42
- Commandsfornon volatilememory 42
- Cuttercommands 42
- Linefeedspancommands 42
- Macrocommands 42
- Panelswitchcommands 42
- Paperdetectingcommands 42
- Statuscommands 42
- Blackmarkcontrolcommands 43
- Command function mode gsp page 43
- Kanjicontrolcommands 43
- Othercommands 43
- Printerfunctionsettingcommands 43
- Command function mode gsp page 44
- Pmu2xxxii 44
- Printcharactercommands 44
- Printcontrolcommands 44
- Printpositioncommands 44
- Barcodecommands 45
- Bitimagecommands 45
- Command function mode gs p page 45
- Command function mode gsp page 45
- Commandsfornon volatilememory 45
- Cuttercommands 45
- Linefeedspancommands 45
- Macrocommands 45
- Panelswitchcommands 45
- Paperdetectingcommands 45
- Statuscommands 45
- Blackmarkcontrolcommands 46
- Command function mode gsp page 46
- Dimensional code commands 46
- Kanjicontrolcommands 46
- Othercommands 46
- Printerfunctionsettingcommands 46
- Command function mode gsp page 47
- Pmu2300iii 47
- Printcharactercommands 47
- Printcontrolcommands 47
- Printpositioncommands 47
- Barcodecommands 48
- Bitimagecommands 48
- Command function mode gs p page 48
- Command function mode gsp page 48
- Commandsfornon volatilememory 48
- Cuttercommands 48
- Linefeedspancommands 48
- Macrocommands 48
- Panelswitchcommands 48
- Paperdetectingcommands 48
- Statuscommands 48
- Blackmarkcontrolcommands 49
- Command function mode gsp page 49
- Controling bezel led 49
- Detecting next black mark 49
- Dimensional code commands 49
- Kanjicontrolcommands 49
- Othercommands 49
- Presenter bezelcontrolcommands 49
- Printerfunctionsettingcommands 49
- Retracting receipt immediately 49
- Setting timer for auto receipt retraction 49
- Command function mode gsp page 50
- Ct p29x series 50
- Ct p29xseries 50
- Printcharactercommands 50
- Printcontrolcommands 50
- Printpositioncommands 50
- Barcodecommands 51
- Bitimagecommands 51
- Command function mode gs p page 51
- Command function mode gsp page 51
- Commandsfornon volatilememory 51
- Cuttercommands 51
- Linefeedspancommands 51
- Macrocommands 51
- Panelswitchcommands 51
- Paperdetectingcommands 51
- Statuscommands 51
- Command function mode gsp page 52
- Dimensional code commands 52
- Kanjicontrolcommands 52
- Othercommands 52
- Printerfunctionsettingcommands 52
- Command details 53
- Description of items 53
- Descriptionofitems 53
- Supportmodel 53
- Aaa bbb 54
- Print control commands 54
- Printcontrolcommands 54
- Aaa bbb 55
- Ct s4000 56
- Ff at selection of page mode 56
- Ff valid only for black mark label specification 56
- Valid only for black mark label specification 56
- Esc ff 57
- Esc j n 58
- Esc d n 59
- Print character commands 60
- Printcharactercommands 60
- Ct s801 ct s851 ct s601 ct s651 61
- Esc sp n 61
- Ａ ａ ａ ａ ａ ａ ａ ａ ａ ａ 61
- Ct s280 ct s281 ct s2000 ct s4000 bd2 2220 pmuseries ct s310ii 62
- Ct s300 ct s310 ct s801 ct s851 ct s601 ct s651 ct p29xseries 62
- Ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 65
- Ct s280 ct s281 ct s300 ct s310 bd2 2220 pmuseries ct p29xseries 65
- Esc s n m a p s x a m n 1 65
- Ａａａａａａａａａａ 67
- Esc e n 69
- Ａａａｂｂｂ 69
- Esc g n 70
- Ａａａｂｂｂ 70
- Ct s280 ct s281 ct s2000 ct s4000 bd2 2220 pmuseries ct s310ii 71
- Ct s300 ct s310 ct s801 ct s851 ct s601 ct s651 ct p29xseries 71
- Esc m n 71
- Ct s280 ct s300 bd2 2220 72
- Ct s281 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 pmuseries ct p29xseries ct s310ii 72
- Ct s300 ct s310 u s a 72
- Ct s310 australia ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 ct s310ii 72
- Esc r n 72
- Esc v n 73
- Esc t n 74
- Esc j n valid in cbm 270 compatible mode 76
- Valid in cbm 270 compatible mode 76
- Ａａａａａ ａａａａａ 76
- Esc j n valid in cbm1000 compatible mode 77
- Valid in cbm1000 compatible mode 77
- Ａａａａａ ａａａａａ 77
- Ct s280 78
- Ct s281 78
- Dc3 n valid in cbm 270 compatible mode 78
- Valid in cbm 270 compatible mode 78
- Ａａａａａ 79
- Dc3 n valid in cbm1000 compatible mode 80
- Valid in cbm1000 compatible mode 80
- Ａａａａａ ａａａａａ 80
- Gs b n 83
- Gs b n 84
- Aaa bbb 85
- Aaa bbb ccc 85
- Print position commands 85
- Printpositioncommands 85
- 50 100 256 86
- Esc n1 n2 86
- Esc d n k null 87
- Esc t n 88
- Esc w xl xh yl yh dxl dxh dyl dyh 89
- Esc nl nh 91
- Esc a n 92
- Gs nl nh 93
- Gs l nl nh 94
- Gs w nl nh 95
- Gs nl nh 97
- Line feed span commands 98
- Ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 99
- Ct s280 ct s281 ct s300 ct s310 bd2 2220 pmuseries ct p29xseries 99
- Esc 3 n 99
- 24dotdoubledensity 24 203dpi 203dpi 4 100
- 24dotsingledensity 24 203dpi 101dpi 3 100
- 8dotdoubledensity 8 67dpi 203dpi 2 100
- 8dotsingledensity 8 67dpi 101dpi 1 100
- Aftercompletionofbitimageprinting theprinterreturnstonormaldataprocessingmode 100
- Bit image commands 100
- Bitimagecommands 100
- Caution whenthevalueof m isoutoftheaboverange thedatafollowingafter n1 isprocessedas 100
- Ct s280 ct s300 ct s2000 ct s4000 bd2 2220 pmuseries supportmodel ct s281 ct s310 ct s801 851 ct s601 651 ct p29xseries ct s310ii 100
- D isbitimagedata bitstobeprintedarespecifiedas 1 andthosenotas 0 thebitimagemodesspecifiedby m areshownasfollows 100
- Dataarediscarded 100
- Esc m n1 n2 d k 100
- Function specifyingthebitimagemode 100
- M mode dotcount dotdensity dotdensity maximum dotcount 100
- Normalprintingdata 100
- Numberofdotsprintedinthehorizontaldirectionisequalton1 256 n2 100
- Outline thespecificationwhichiscommontothemodel accordingtothenumberofdotsspecifiedin n1 n2 specifythebitimageofmode m the number of dots printed is divided by 256 whose quotient is taken as n2 and residual as n1 the total 100
- Range m 0 1 32 33 0 n1 255 0 n2 2 0 d 255 k n1 256 n2 m 0 1 k n1 256 n2 3 m 32 33 100
- Supportmodel 100
- Thespecificationwhichdependonthemodel 1 4 unit dpi 100
- Verticaldirection horizontaldirection 100
- Whenbitimagedatahavebeeninputinexcessofdotpositionsthatcanbeprintedononeline theexcess 100
- Ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 101
- Ct s280 ct s281 ct s300 ct s310 bd2 2220 pmuseries ct p29xseries 101
- Gs n1 n2 d n1xn2x8 101
- Gs v 0 m xl xh yl yh d1 dk 103
- Msb lsb 104
- ドット 512ドット 104
- Dle eot n 105
- Status commands 105
- Statuscommands 105
- Bit 5 printing is stopped if the paper end detector detects a paper out 106
- Bit 6 if a head overheat error is detected the printing is stopped until the 106
- Ct s280 106
- Head temperature falls at this time bit 6 1 106
- If the command is executed right after power on in error status correct 106
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 106
- Status may not be sent out 106
- A mechanism error occurred a bm detection error occurred only when b m paper is selected 107
- At bm label model it is generated by bm label error 107
- Auto cutter error not occurred 00h 0 107
- Auto cutter error occurred 08h 8 107
- Bit 2 in case of msw3 8 on it is generated by cover open 107
- Bit 3 if this error occurred because of a paper jam for example remove the 107
- Bit 5 when paper near end sensor option is installed printing is stopped 107
- Bit 6 if a head overheat error is detected the printing is stopped until the 107
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 107
- Ct s281 107
- Head temperature falls at this time bit 6 1 107
- If the paper end detector detects a paper out state or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 107
- No mechanism error occurred no bm detection error occurred only when b m paper is selected 107
- Bit 2 3 0 108
- Bit 2 3 if the paper end detector is uninstalled or if msw2 8 0 at this time 108
- Bit5 6 when cover is open paper end may be detected as well 108
- Ct s281 108
- A mechanism error occurred a bm detection error occurred only when bm paper is selected 109
- At bm label model it is generated by bm label error 109
- Auto cutter error not occurred 00h 0 3 auto cutter error occurred 08h 8 109
- Auto recovery error not occurred 00h 0 6 auto recovery error occurred 40h 64 109
- Bit 2 in case of msw3 8 on it is generated by cover open 109
- Bit 3 if this error occurred because of a paper jam for example remove the 109
- Bit 5 printing is stopped if the paper end detector detects a paper out 109
- Bit 6 if a head overheat error is detected the printing is stopped until the 109
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 109
- Ct s300 ct s 310 109
- Fixed 00h 0 109
- Fixed 02h 2 109
- Fixed 10h 16 109
- Head temperature falls at this time bit 6 1 109
- No mechanism error occurred no bm detection error occurred only when bm paper is selected 109
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 109
- Unrecoverable error not occurred 00h 0 5 unrecoverable error occurred 20h 32 109
- Ct s300 ct s310 110
- Auto cutter error not occurred 00h 0 3 auto cutter error occurred 08h 8 111
- Auto recovery error not occurred 00h 0 6 auto recovery error occurred 40h 64 111
- Bit 2 in case of msw3 8 on it is generated by cover open bit 3 if this error occurred because of a paper jam for example remove the 111
- Bit 5 printing is stopped if the paper end detector detects a paper out 111
- Bit 6 if a head overheat error is detected the printing is stopped until the 111
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 111
- Ct s310ii 111
- Fixed 00h 0 111
- Fixed 02h 2 111
- Fixed 10h 16 111
- Head temperature falls at this time bit 6 1 111
- No mechanism error occurred 00h 0 2 a mechanism error occurred 04h 4 111
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 111
- Unrecoverable error not occurred 00h 0 5 unrecoverable error occurred 20h 32 111
- A mechanism error occurred a bm label detection error occurred only when bm label paper is selected 112
- At bm label model it is generated by bm label error 112
- Bit 2 in case of msw3 8 on it is generated by cover open 112
- Bit 3 if this error occurred because of a paper jam for example remove the 112
- Bit 5 printing is stopped if the paper end detector detects a paper out 112
- Bit 6 if a head overheat error is detected the printing is stopped until the 112
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 112
- Ct s2000 112
- Head temperature falls at this time bit 6 1 112
- No mechanism error occurred no bm label detection error occurred only when bm label paper is selected 112
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 112
- Ct s2000 113
- A mechanism error occurred a bm label detection error occurred only when bm label paper is selected 114
- At bm label model it is generated by bm label error 114
- Bit 2 in case of msw3 8 on it is generated by cover open 114
- Bit 3 if this error occurred because of a paper jam for example remove the 114
- Bit 5 printing is stopped if the paper end detector detects a paper out 114
- Bit 6 if a head overheat error is detected the printing is stopped until the 114
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 114
- Ct s4000 114
- Head temperature falls at this time bit 6 1 114
- No mechanism error occurred no bm label detection error occurred only when bm label paper is selected 114
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 114
- Ct s4000 115
- A mechanism error occurred a bm label detection error occurred only when bm label paper is selected 116
- At bm label model it is generated by bm label error 116
- Bit 2 in case of msw3 8 on it is generated by cover open 116
- Bit 3 if this error occurred because of a paper jam for example remove the 116
- Bit 5 printing is stopped if the paper end detector detects a paper out 116
- Bit 6 if a head overheat error is detected the printing is stopped until the 116
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 116
- Ct s801 ct s851 ct s601 ct s651 116
- Head temperature falls at this time bit 6 1 116
- No mechanism error occurred no bm label detection error occurred only when bm label paper is selected 116
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 116
- Ct s801 ct s851 ct s601 ct s651 117
- Bd2 2220 118
- Bit 3 if this error occurred because of a paper jam for example remove the 118
- Bit 5 printing is stopped if the paper end detector detects a paper out 118
- Bit 6 if a head overheat error is detected the printing is stopped until the 118
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 118
- Head temperature falls at this time bit 6 1 118
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 118
- A mechanism error occurred a bm label detection error occurred only when bm label paper is selected 119
- At bm label model it is generated by bm label error 119
- Bit 2 in case of msw3 8 on it is generated by cover open 119
- Bit 3 if this error occurred because of a paper jam for example remove the 119
- Bit 5 printing is stopped if the paper end detector detects a paper out 119
- Bit 6 if a head overheat error is detected the printing is stopped until the 119
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 119
- Head temperature falls at this time bit 6 1 119
- No mechanism error occurred no bm label detection error occurred only when bm label paper is selected 119
- Pmu2xxx pmu2xxxii 119
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 119
- Pmu2xxx pmu2xxxii 120
- A mechanism error occurred a bm label detection error occurred only whenbm label paper is selected a presenter error occurred 121
- At bm label model it is generated by bm label error at presenter model it is generated by presenter error 121
- Bit 2 in case of msw3 8 on it is generated by cover open 121
- Bit 3 if this error occurred because of a paper jam for example remove the 121
- Bit 5 printing is stopped if the paper end detector detects a paper out 121
- Bit 6 if a head overheat error is detected the printing is stopped until the 121
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 121
- Head temperature falls at this time bit 6 1 121
- No mechanism error occurred no bm label detection error occurred only when bm label paper is selected no presenter error 121
- Pmu2300iii 121
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 121
- Pmu2300iii 122
- A mechanism error occurred 123
- Bit 2 in case of msw3 8 on it is generated by cover open bit 3 if this error occurred because of a paper jam for example remove the 123
- Bit 5 printing is stopped if the paper end detector detects a paper out 123
- Bit 6 if a head overheat error is detected the printing is stopped until the 123
- Cause of the error and then dle enq n 1 n 2 can be used to recover from the error however it is not possible to recover from any error due to a circuit problem e g broken wire 123
- Ct p29x series 123
- Head temperature falls at this time bit 6 1 123
- No mechanism error occurred 123
- State or if the printer is out of paper when the paper near end sensor is enabled by esc c 4 at this time bit 5 1 123
- Ct p29x series 124
- Valid in cbm1000 compatible mode 125
- Ct p29xseries ct s310ii 126
- Gs a n 127
- Ct p29xseries ct s310ii 128
- Ct s280 ct s281 bd2 2220 pmuseries ct p29xseries 128
- Ct s281 128
- Pmu2300iii 128
- Ct s801 ct s851 ct s601 ct s651 ct s310ii 130
- Pmu2300iii 130
- Ct p29xseries ct s310ii 131
- Ct s280 ct s281 bd2 2220 pmuseries ct p29xseries 131
- Ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 ct s310ii 131
- Gs r n 131
- Ct p29xseries ct s301ii 133
- Ct s280 ct s281 ct s300 ct s310 ct s2000 ct s4000 bd2 2220 pmuseries 133
- Ct s801 ct s851 ct s601 ct s651 133
- Esc c 3 n 133
- Paperdetectingcommands 133
- Ct p29xseries ct s301ii 134
- Esc c 4 n 134
- Ct s801 ct s851 135
- Esc c 5 n 135
- Panelswitchcommands 135
- Macrocommands 136
- Gs n1 n2 n3 137
- Ct s281 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 pmuseries 138
- Cuttercommands 138
- Ct s281 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 pmuseries 139
- Pmu2300iii 139
- Ct s281 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 pmuseries 140
- Gs v m 1 gs v m n 2 140
- Pmu2300iii 140
- 1 2 1 2 141
- Barcodecommands 141
- Gs h n 141
- Ct s280 ct s281 ct s2000 ct s4000 bd2 2220 pmuseries ct s301ii 142
- Ct s300 ct s310 ct s801 ct s851 ct s601 ct s651 ct p29xseries 142
- Gs f n 142
- Gs h n 143
- 1 gs k m d1 dk nul 2 gs k m n d1 dn 144
- Ct s280 ct s281 ct s300 ct s310 ct s2000 ct s4000 bd2 2220 pmuseries ct p29xseries 144
- Ct s801 ct s851 ct s601 ct s651 ct s310ii 144
- Gs1 databar expanded 144
- Gs1 databar limited n 13 4 144
- Gs1 databar mnidirectional n 13 4 144
- Gs1 databar truncated n 13 4 144
- Gs w n 150
- Commandsfornon volatilememory 151
- Gs c pl ph m fn b c1 c2 d1 dk 151
- Fn 0 48 function0 erasing specified record 152
- Fn 1 49 function1 storing data to specified record 152
- Gs c pl ph m fn b c1 c2 d1 dk 152
- Gs c pl ph m fn b kc1 kc2 152
- Fn 2 50 function2 sending data stored inspecified record 153
- Gs c pl ph m fn b c1 c2 153
- Fn 3 51 function3 sending useamount 154
- Fn 4 52 function4 sending remaining capacity 154
- Gs c pl ph m fn b 154
- Fn 5 53 function5 sending key codelist ofstored record 155
- Gs c pl ph m fn b 155
- Fn 6 54 function6 erasing allusernvmemory area ina lump 156
- Gs c pl ph m fn b d1 d2 d3 156
- Gs l pl ph m fn parameter gs 8 l p1 p2 p3 p4 m fn parameter 157
- Fn 0 48 function48 sending nvgraphicsmemory capacity 158
- Fn 2 50 function50 printing graphicsdata stored inprint buffer 158
- Gs l pl ph m fn 158
- Fn 3 51 function51 sending theremaining amount ofnvgraphicsmemory 159
- Gs l pl ph m fn 159
- Fn 64 function64 sending key codelist ofdefined nvgraphics 160
- Gs l pl ph m fn d1 d2 160
- Fn 65 function65 erasing alldata ofnvgraphicsina lump 161
- Fn 66 function66 erasing specified nvgraphicsdata 161
- Gs l pl ph m fn d1 d2 d3 161
- Gs l pl ph m fn kc1 kc2 161
- C d1 dk 1 c d1 dk b 162
- Fn 67 function67 defining rastertypegraphicsdata to nvmemory 162
- Gs l pl ph m fn a kc1 kc2 b xl xh yl yh 162
- Fn 69 function69 printing specified graphics 163
- Gs l pl ph m fn kc1 kc2 x y 163
- Fn 112 function112 storing rastertypegraphicsdata to print buffer 164
- Gs l pl ph m fn a bx by c xl xh yl yh d1 dk 164
- Gs g 0 m nl nh 165
- Gs g 2 m nl nh 166
- Fs p n m 167
- Ct s2000 ct 4000 ct s801 ct s851 ct s601 ct s651 ct s301ii 168
- Ct s280 ct s281 ct s300 ct s310 bd2 2220 pmuseries ct p29xseries 168
- Xl xh yl yh d1 dk 1 xl xh yl yh d1 dk n 168
- Kanjicontrolcommands 170
- Ct s280 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 ct s310ii 171
- 漢字 4a z 171
- 漢字漢字 172
- Ct s280 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 ct s310ii 173
- Ct s2000 ct s4000 174
- Ct s280 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 ct s310ii 174
- Fs 2 a1 a2 d k 174
- Ct s280 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s310ii ct s601 ct s651 176
- Ct s280 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 ct s310ii 176
- Ct s310ii 176
- Fs c n 176
- Fs s n1 n2 178
- Fs w n 179
- 漢字 179
- Ct s2000 ct s4000 180
- Ct s280 ct s281 ct s300 ct s310 ct s801 ct s851 ct s601 ct s651 bd2 2220 pmuseries ct p29xseries ct s310ii 180
- Fn 48 function48 set kanjifonts 180
- Fs a pl ph fn 180
- Fs a pl ph fn m 180
- Blackmarkcontrolcommands 181
- Ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 181
- Ct s281 181
- Gs a m n 183
- 67890 11 12 13 14 15 016017018019020 21 22 23 24 25 184
- Gs c 0 m n 184
- 0 0 50 185
- 50 50 45 185
- Gs c 1 n1 n2 n3 n4 n5 n6 185
- Gs c 2 n1 n2 186
- Gs c n1 n2 n3 n4 n5 187
- Blackmarkpaper labelpaper 189
- Gs l n1l n1h n2l n2h 189
- Gs p n 190
- Printing and feeding black marl label paper to manual cut position 191
- Among pmu series only pmu2xxxx type ii and iii support this function 192
- Gs d pl ph m a1 b1 ak bk 192
- Pmu2xxxii pmu2300iii 192
- Printerfunctionsettingcommands 192
- Gs e pl ph fn 193
- Fn 1 function1 transferring to printerfunctionsetting mode 194
- Fn 2 function2 end ofprinterfunctionsetting mode 194
- Gs e pl ph fn d1 d2 194
- Gs e pl ph fn d1 d2 d3 194
- Fn 3 function3 setting memory switchvalue 195
- Gs e pl ph fn a1 b18 b11 ak bk8 bk1 195
- Ct s280 196
- Setting msw 1 a 1 196
- Setting msw 2 a 2 196
- Setting msw 3 a 3 196
- Ct s281 197
- Setting msw 1 a 1 197
- Setting msw 2 a 2 197
- Setting msw 3 a 3 197
- Ct s281 198
- Default setting of msw4 4 depends on the model thermal paper is the default of the standard model msw 4 5 is valid only when black mark label is set if msw4 4 is set for 198
- Msw4 8 is invalid when black mark label is selected cut type for black mark label paper is only full cut 198
- Setting msw 4 a 4 198
- Setting msw 5 a 5 198
- Thermal paper it is invalid 198
- Ct s300 199
- Setting msw 1 a 1 199
- Setting msw 2 a 2 199
- Setting msw 3 a 3 199
- Ct s300 200
- Msw 4 1 2 are valid when msw 3 4 is on 200
- Setting msw 4 a 4 200
- Ct s310 201
- Setting msw 1 a 1 201
- Setting msw 2 a 2 201
- Setting msw 3 a 3 201
- Setting msw 4 a 4 201
- Ct s310 202
- Msw 4 1 2 are valid when msw 3 4 is on 202
- Setting msw 5 a 5 202
- Ct s310ii 203
- Setting msw 1 a 1 203
- Setting msw 2 a 2 203
- Setting msw 3 a 3 203
- Setting msw 4 a 4 203
- With msw1 2 parallel i f 4k fixed and usb i f 16k fixed are disabled 203
- With serial i f 45 bytes are enabled only when dma control msw7 6 is disabled 203
- Ct s310ii 204
- Setting msw 5 a 5 204
- Setting msw 6 a 6 204
- Ct s2000 205
- Setting msw 1 a 1 205
- Setting msw 2 a 2 205
- Setting msw 3 a 3 205
- Setting msw 4 a 4 standard model 205
- With msw1 2 parallel i f 4k fixed and usb i f 16k fixed are disabled 205
- With serial i f 45 bytes are enabled only when dma control msw7 6 is disabled 205
- Ct s2000 206
- Mark label paper is only full cut 206
- Msw 4 5 is valid only if black mark label is set if msw4 4 is set for 206
- Msw4 8 is invalid when black mark label is selected cut type for black 206
- Setting msw 4 a 4 black mark label model 206
- Setting msw 5 a 5 206
- Thermal paper it is invalid 206
- Ct s4000 207
- Setting msw 1 a 1 207
- Setting msw 2 a 2 207
- Setting msw 3 a 3 207
- Ct s4000 208
- Default of the standard model 208
- Default setting of msw4 4 depends on the model thermal paper is the 208
- Mark label paper is only full cut 208
- Msw 4 5 is valid only for black mark label model if msw4 4 is set for 208
- Msw4 8 is invalid when black mark label is selected cut type for black 208
- Setting msw 4 a 4 208
- Setting msw 5 a 5 208
- Thermal paper it is invalid 208
- Ct s801 ct s851 ct s601 ct s651 209
- Setting msw 1 a 1 209
- Setting msw 2 a 2 209
- Setting msw 3 a 3 209
- With msw1 2 parallel i f 4k fixed and usb i f 16k fixed are disabled 209
- With serial i f 45 bytes are enabled only when dma control msw7 6 is disabled 209
- Ct s801 ct s851 ct s601 ct s601 210
- Default of the standard model 210
- Default setting of msw4 4 depends on the model thermal paper is the 210
- Mark label paper is only full cut 210
- Msw 4 5 is valid only for black mark label model if msw4 4 is set for 210
- Msw4 8 is invalid when black mark label is selected cut type for black 210
- Setting msw 4 a 4 210
- Setting msw 5 a 5 210
- Setting msw 6 a 6 210
- Thermal paper it is invalid 210
- Bd2 2220 211
- Lt2x20 series head down head up lt2x21 series platen close platen open 211
- Name depends on a mechanism to use 211
- Setting msw 1 a 1 211
- Setting msw 2 a 2 211
- Setting msw 3 a 3 211
- Base style i 212
- Base style is pmu2xx0 pmu2xx2 212
- Msw 4 1 2 are valid when msw 3 4 is on 212
- Platen ope 212
- Pmu2xxx 212
- Setting msw 1 a 1 212
- Setting msw 2 a 2 212
- Setting msw 3 a 3 212
- Setting msw 4 a 4 212
- Pmu2xxx 213
- Setting msw 5 a 5 213
- Platen ope 214
- Pmu2xxxii 214
- Setting msw 1 a 1 214
- Setting msw 2 a 2 214
- Setting msw 3 a 3 214
- Base style i 215
- Base style is pmu2xx0 pmu2xx2 215
- Msw 4 1 2 are valid when msw 3 4 is on 215
- Pmu2xxxii 215
- Setting msw 4 a 4 215
- Setting msw 5 a 5 215
- Msw 4 1 2 are valid when msw 3 4 is on 216
- Platen clos 216
- Platen ope 216
- Pmu2300iii 216
- Pmu2xxxiii 216
- Setting msw 1 a 1 216
- Setting msw 2 a 2 216
- Setting msw 3 a 3 216
- Setting msw 4 a 4 216
- Setting msw 5 a 5 217
- Setting msw11 a 11 217
- Setting msw12 a 12 217
- Ct p29x series 218
- Platen ope 218
- Setting msw 1 a 1 218
- Setting msw 2 a 2 218
- Setting msw 3 a 3 218
- Ct p29x series 219
- Msw 4 1 2 are valid when msw 3 4 is on 219
- Setting msw 4 a 4 219
- Setting msw 5 a 5 219
- A 1 2 3 4 5 11 12 220
- A 1 2 3 4 5 6 220
- Ct p29xseries 220
- Ct s200 220
- Ct s28 220
- Ct s280 bd2 2220 220
- Ct s300 220
- Ct s31 220
- Ct s310 ct s2000 ct s4000 ct s801 ct s601 220
- Ct s400 220
- Ct s801 ct s851 ct s601 ct s601 ct s310ii 220
- Fn 4 function4 sending theset memory switchvalue 220
- Gs e pl ph fn a 220
- Pmu2300iii 220
- Pmu2xx 220
- Pmu2xxxii 220
- 244 245 246 247 248 221
- A 5 6 213 214 216 217 218 221
- Bd2 2220 221
- Ct p29xseries 221
- Ct s2000 221
- Ct s280 221
- Ct s281 221
- Ct s300 ct s310 221
- Ct s310ii 221
- Ct s4000 221
- Ct s601 ct s651 221
- Ct s801 221
- Ct s851 221
- Fn 5 function5 setting customized value 221
- Gs e pl ph fn a1 n1l n1h ak nkl nkh 221
- Pmu2300iii 221
- Pmu2xxx pmu2xxxii 221
- A 116 sets the paper specified by nl nh 256 223
- A 201 outputs ack to the position specified by nl nh 256 223
- A 202 controls input buffer full busy with the value selected by 223
- A 5 sets printing density to the level specified by nl nh 256 223
- A 6 sets printing speed to the value specified by nl nh 256 223
- Ct s280 223
- Nl nh 256 and controls busy with output cancel timing remaining capacity 223
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 223
- A 214 select the enable disable of kanji specified by nl nh 256 224
- A 216 select the jis shift jis specified by nl nh 256 224
- A 217 select the international character set specified by nl nh 256 224
- A 218 select the codepage specified by nl nh 256 224
- Ct s280 224
- Jis shift jis 224
- A 116 sets the paper specified by nl nh 256 225
- A 202 controls input buffer full busy with the value selected by 225
- A 213 selects the flow control specified by nl nh 256 when virtual 225
- A 5 sets printing density to the level specified by nl nh 256 225
- A 6 sets printing speed to the value specified by nl nh 256 225
- Com is set 225
- Ct s281 225
- Nl nh 256 and controls busy with output cancel timing remaining capacity 225
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 225
- A 214 select the enable disable of kanji specified by nl nh 256 226
- A 216 select the jis shift jis specified by nl nh 256 226
- A 217 select the international character set specified by nl nh 256 226
- A 218 select the codepage specified by nl nh 256 226
- A 226 sets the wait time for manual cut by nl nh 256 226
- Ct s281 226
- If 0 is specified printer wait until feed is pressed 226
- Jis shift jis 226
- Nl nh 256 1200 unit 1 second default 3 seconds 226
- A 116 sets the paper specified by nl nh 256 227
- A 201 outputs ack to the position specified by nl nh 256 227
- A 3 sets paper width to the size specified by nl nh 256 227
- A 5 sets printing density to the level specified by nl nh 256 227
- A 6 sets printing speed to the value specified by nl nh 256 227
- A 97 sets the number of divisions for conducting head specified by 227
- Ct s300 227
- Nl nh 256 227
- Ct s300 228
- A 116 sets the paper specified by nl nh 256 229
- A 3 sets paper width to the size specified by nl nh 256 229
- A 5 sets printing density to the level specified by nl nh 256 229
- A 6 sets printing speed to the value specified by nl nh 256 229
- A 97 sets the number of divisions for conducting head specified by 229
- Ct s310 229
- Nl nh 256 229
- Ct s310 230
- A 1 sets the user nv memory capacity to the size specified by 231
- A 2 sets nv graphic memory capacity to the size specified by 231
- A 3 sets paper width to the size specified by nl nh 256 231
- A 5 sets printing density to the level specified by nl nh 256 231
- A 6 sets printing speed to the value specified by nl nh 256 231
- Ct s310ii 231
- Nl nh 256 231
- A 202 controls input buffer full busy with the value selected by 232
- A 212 selects dma direct memory access control of serial 232
- A 213 selects the flow control specified by nl nh 256 when virtual 232
- A 214 select the enable disable of kanji specified by nl nh 256 232
- A 216 select the jis shift jis specified by nl nh 256 232
- A 217 select the international character set specified by nl nh 256 232
- A 218 select the codepage specified by nl nh 256 232
- Com is set 232
- Communication specified by nl nh 256 232
- Ct s310ii 232
- Nl nh 256 and controls busy with output cancel timing remaining capacity 232
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 232
- Ct s310ii 233
- Small top margin long back feed at printing start 233
- A 1 sets the user nv memory capacity to the size specified by 234
- A 2 sets nv graphic memory capacity to the size specified by 234
- A 3 sets paper width to the size specified by nl nh 256 234
- A 5 sets printing density to the level specified by nl nh 256 234
- A 6 sets printing speed to the value specified by nl nh 256 234
- Ct s2000 234
- Nl nh 256 234
- A 116 sets the paper specified by nl nh 256 235
- A 201 outputs ack to the position specified by nl nh 256 235
- A 202 controls input buffer full busy with the value selected by 235
- A 212 selects dma direct memory access control of serial 235
- A 213 selects the flow control specified by nl nh 256 when virtual 235
- A 214 select the enable disable of kanji specified by nl nh 256 235
- A 220 sets the maximum width of black mark by the amount selected by 235
- Com is set 235
- Communication specified by nl nh 256 235
- Ct s2000 235
- Nl nh 256 235
- Nl nh 256 32767 unit 1 dot initial value 40 dots 235
- Nl nh 256 and controls busy with output cancel timing remaining capacity 235
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 235
- Ct s2000 236
- A 1 sets the user nv memory capacity to the size specified by 237
- A 2 sets nv graphic memory capacity to the size specified by 237
- A 3 sets paper width to the size specified by nl nh 256 237
- A 5 sets printing density to the level specified by nl nh 256 237
- A 6 sets printing speed to the value specified by nl nh 256 237
- Ct s4000 237
- Nl nh 256 237
- A 116 sets the paper specified by nl nh 256 238
- A 201 outputs ack to the position specified by nl nh 256 238
- A 202 controls input buffer full busy with the value selected by nl nh 256 and controls busy with output cancel timing remaining capacity 238
- A 212 selects dma direct memory access control of serial 238
- A 213 selects the flow control specified by nl nh 256 when virtual 238
- A 214 select the enable disable of kanji specified by nl nh 256 238
- Com is set 238
- Communication specified by nl nh 256 238
- Ct s4000 238
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 238
- A 1 sets the user nv memory capacity to the size specified by 239
- A 2 sets nv graphic memory capacity to the size specified by 239
- A 3 sets paper width to the size specified by nl nh 256 239
- A 5 sets printing density to the level specified by nl nh 256 239
- A 6 sets printing speed to the value specified by nl nh 256 239
- Ct s801 ct s851 239
- Nl nh 256 239
- A 116 sets the paper specified by nl nh 256 240
- A 201 outputs ack to the position specified by nl nh 256 240
- A 202 controls input buffer full busy with the value selected by 240
- A 212 selects dma direct memory access control of serial 240
- A 213 selects the flow control specified by nl nh 256 when virtual 240
- A 214 select the enable disable of kanji specified by nl nh 256 240
- A 216 select the jis shift jis specified by nl nh 256 240
- Com is set 240
- Communication specified by nl nh 256 240
- Ct s801 ct s851 240
- Nl nh 256 and controls busy with output cancel timing remaining capacity 240
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 240
- A 217 select the international character set specified by nl nh 256 241
- A 218 select the codepage specified by nl nh 256 241
- A 220 sets the maximum width of black mark by the amount selected by 241
- A 221 sets the maximum length of black mark page with the value 241
- A 222 head margin set by the value selected by nl nh 256 241
- A 223 sets black mark bottom margin with the amount selected by 241
- A 224 sets cut distance with the value selected by nl nh 256 241
- Ct s801 ct s851 241
- Nl nh 256 241
- Nl nh 256 255 unit 1 dot initial value 232 dots 241
- Nl nh 256 255 unit 1 dot initial value 34 dots 241
- Nl nh 256 32767 unit 1 dot initial value 2360 dots 241
- Nl nh 256 32767 unit 1 dot initial value 40 dots 241
- Nl nh 256 32767 unit 168dot initial value 0dot 241
- Selected by nl nh 256 241
- A 225 sets head distance with the value selected by nl nh 256 242
- A 231 selects the enable disable of download lcd message specified by 242
- A 232 sets the lcd auto off time specified by nl nh 256 242
- A 233 selects the enable disable of key lock specified by nl nh 256 242
- A 234 selects the direction of lcd message specified by nl nh 256 242
- A 240 sets the buzzer level specified by nl nh 256 242
- A 241 sets the max number of 1 head division specified by nl nh 256 242
- Ct s801 ct s851 242
- Nl nh 256 242
- Nl nh 256 255 unit 1 dot initial value 56 dots 242
- A 242 sets the max dot number with powered usb specified by 243
- A 243 selects the mechanism type specified by nl nh 256 243
- Ct s801 ct s851 243
- Nl nh 256 243
- A 1 sets the user nv memory capacity to the size specified by 244
- A 2 sets nv graphic memory capacity to the size specified by 244
- A 3 sets paper width to the size specified by nl nh 256 244
- A 5 sets printing density to the level specified by nl nh 256 244
- A 6 sets printing speed to the value specified by nl nh 256 244
- Ct s601 ct s651 244
- Nl nh 256 244
- A 116 sets the paper specified by nl nh 256 245
- A 201 outputs ack to the position specified by nl nh 256 245
- A 202 controls input buffer full busy with the value selected by 245
- A 212 selects dma direct memory access control of serial 245
- A 213 selects the flow control specified by nl nh 256 when virtual 245
- A 214 select the enable disable of kanji specified by nl nh 256 245
- A 216 select the jis shift jis specified by nl nh 256 245
- Com is set 245
- Communication specified by nl nh 256 245
- Ct s601 ct s651 245
- Nl nh 256 and controls busy with output cancel timing remaining capacity 245
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 245
- A 217 select the international character set specified by nl nh 256 246
- A 218 select the codepage specified by nl nh 256 246
- A 220 sets the maximum width of black mark by the amount selected by 246
- A 221 sets the maximum length of black mark page with the value 246
- A 222 head margin set by the value selected by nl nh 256 246
- A 223 sets black mark bottom margin with the amount selected by 246
- A 224 sets cut distance with the value selected by nl nh 256 246
- Ct s601 ct s651 246
- Nl nh 256 246
- Nl nh 256 255 unit 1 dot initial value 232 dots 246
- Nl nh 256 255 unit 1 dot initial value 34 dots 246
- Nl nh 256 32767 unit 1 dot initial value 2360 dots 246
- Nl nh 256 32767 unit 1 dot initial value 40 dots 246
- Nl nh 256 32767 unit 168dot initial value 0dot 246
- Selected by nl nh 256 246
- A 225 sets head distance with the value selected by nl nh 256 247
- A 240 sets the buzzer level specified by nl nh 256 247
- A 241 sets the max number of 1 head division specified by nl nh 256 247
- A 242 sets the max dot number with powered usb specified by 247
- A 243 selects the mechanism type specified by nl nh 256 247
- Ct s601 ct s651 247
- Nl nh 256 247
- Nl nh 256 255 unit 1 dot initial value 56 dots 247
- A 201 outputs ack to the position specified by nl nh 256 248
- A 202 controls input buffer full busy with the value selected by 248
- A 5 sets printing density to the level specified by nl nh 256 248
- A 6 sets printing speed to the value specified by nl nh 256 248
- Bd2 2220 248
- Nl nh 256 and controls busy with output cancel timing remaining capacity 248
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 248
- A 201 outputs ack to the position specified by nl nh 256 249
- A 202 controls input buffer full busy with the value selected by 249
- A 220 sets the maximum width of black mark by the amount selected by 249
- A 5 sets printing density to the level specified by nl nh 256 249
- A 6 sets printing speed to the value specified by nl nh 256 249
- Nl nh 256 249
- Nl nh 256 32767 unit 1 dot initial value 40 dots 249
- Nl nh 256 and controls busy with output cancel timing remaining capacity 249
- Pmu2xxx 249
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 249
- Pmu2xxx 250
- A 202 controls input buffer full busy with the value selected by 251
- A 5 sets printing density to the level specified by nl nh 256 251
- A 6 sets printing speed to the value specified by nl nh 256 251
- Nl nh 256 and controls busy with output cancel timing remaining capacity 251
- Pmu2xxxii 251
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 251
- Pmu2xxxii 252
- A 130 sets the auto retraction time length selected by nl nh 256 if n 0 time length is not set retraction is done by gs r 0 command 253
- A 131 sets the time length of bezel led on at waiting selected by 253
- A 132 sets the time length of bezel led on at blinking selected by 253
- A 133 sets the time length of bezel led off at blinking selected by 253
- A 5 sets printing density to the level specified by nl nh 256 253
- A 6 sets printing speed to the value specified by nl nh 256 253
- Nl nh 256 253
- Nl nh 256 3000 unit 100ms initial value 5 500ms 253
- Nl nh 256 32767 unit 100ms initial value 0 led is kept on 253
- Nl nh 256 32767 unit 100ms initial value 50 5000ms 253
- Pmu2300iii 253
- A 134 sets the state of bezel led at waiting selected by nl nh 256 254
- A 135 sets the state of bezel led at printing selected by nl nh 256 254
- A 136 sets the state of bezel led at ejecting selected by nl nh 256 254
- A 202 controls input buffer full busy with the value selected by 254
- A 213 selects the flow control specified by nl nh 256 when virtual 254
- Bezel led state at ejecting 254
- Bezel led state at printing 254
- Bezel led state at waiting 254
- Blinking 254
- Com is set 254
- Nl nh 256 and controls busy with output cancel timing remaining capacity 254
- Pmu2300iii 254
- Xon xoff is also output by the establishment of conditions ignores the data received when input buffer idle capacity is 0 254
- A 214 select the enable disable of kanji specified by nl nh 256 255
- A 216 select the jis shift jis specified by nl nh 256 255
- A 217 select the international character set specified by nl nh 256 255
- A 218 select the codepage specified by nl nh 256 255
- Pmu2300iii 255
- Pmu2300iii 256
- A 213 selects the flow control specified by nl nh 256 when virtual 257
- A 214 select the enable disable of kanji specified by nl nh 256 257
- A 216 select the jis shift jis specified by nl nh 256 257
- A 217 select the international character set specified by nl nh 256 257
- A 5 sets printing density to the level specified by nl nh 256 257
- A 6 sets printing speed to the value specified by nl nh 256 257
- Com is set 257
- Ct p29x series 257
- A 218 select the codepage specified by nl nh 256 258
- Ct p29x series 258
- 245 246 247 248 259
- A 5 6 213 214 216 217 218 259
- Bd2 2220 259
- Ct p29xseries 259
- Ct s2000 259
- Ct s280 259
- Ct s281 259
- Ct s300 ct s310 259
- Ct s310ii 259
- Ct s4000 259
- Ct s601 259
- Ct s801 259
- Fn 6 function6 sending theset customized value 259
- Gs e pl ph fn a 259
- Pmu2300iii 259
- Pmu2xxx pmu2xxxii 259
- A 116 when kind of paper is specified 261
- A 201 when ack output position is specified 261
- A 202 input buffer full busy output cancel timing 261
- A 214 when kanji is specified 261
- A 5 when print density is specified 261
- A 6 when printing speed is specified 261
- Ct s280 261
- A 216 when jis shift jis is specified 262
- A 217 when international character set is specified 262
- A 218 when codepage is specified 262
- Ct s280 262
- A 116 when kind of paper is specified 263
- A 202 input buffer full busy output cancel timing 263
- A 213 when the flow control of virtual com is specified 263
- A 214 when kanji is specified 263
- A 5 when print density is specified 263
- A 6 when printing speed is specified 263
- Ct s281 263
- A 216 when jis shift jis is specified 264
- A 217 when international character set is specified 264
- A 218 when codepage is specified 264
- A 226 when the wait time for manual cut is specified 264
- Ct s281 264
- Wait time for manual 264
- A 116 when kind of paper is specified 265
- A 3 when paper width is specified 265
- A 5 when print density is specified 265
- A 6 when printing speed is specified 265
- A 97 when number of divisions for head conducting is specified 265
- Ct s300 ct s310 265
- A 201 when ack output position is specified 266
- A 202 input buffer full busy output cancel timing 266
- A 220 when maximum black mark width is specified 266
- A 221 when maximum length of black mark page is specified 266
- A 222 when head margin is specified 266
- A 223 when bottom margin is specified 266
- A 224 when cut distance is specified 266
- A 225 when head distance is specified 266
- Ct s300 ct s310 266
- Support by ct s300 266
- A 1 when user nv memory capacity is specified 267
- A 2 when nv graphics memory capacity is specified 267
- A 3 when paper width is specified 267
- A 5 when print density is specified 267
- A 6 when printing speed is specified 267
- Ct s310ii 267
- A 202 input buffer full busy output cancel timing 268
- A 212 when dma direct memory access control of serial communication 268
- A 213 when the flow control of virtual com is specified 268
- A 214 when kanji is specified 268
- A 216 when jis shift jis is specified 268
- A 217 when international character set is specified 268
- Ct s310ii 268
- Is specified 268
- A 218 when codepage is specified 269
- A 244 when top margin is specified 269
- A 245 when line gap reduce n is specified 269
- A 246 when reduced char v h is specified 269
- Ct s310ii 269
- Reduced char v h 269
- A 247 when auto side shift is specified 270
- A 248 when buzzer event is specified 270
- Auto side 270
- Ct s310ii 270
- A 1 when user nv memory capacity is specified 271
- A 2 when nv graphics memory capacity is specified 271
- A 3 when paper width is specified 271
- A 5 when print density is specified 271
- A 6 when printing speed is specified 271
- Ct s2000 271
- A 116 when kind of paper is specified 272
- A 201 when ack output position is specified 272
- A 202 input buffer full busy output cancel timing 272
- A 212 when dma direct memory access control of serial communication 272
- A 213 when the flow control of virtual com is specified 272
- A 214 when kanji is specified 272
- A 220 when maximum black mark width is specified 272
- A 221 when maximum black mark page length is specified 272
- Ct s2000 272
- Is specified 272
- Setting status sending data 272
- A 222 when head margin is specified 273
- A 223 when bottom margin is specified 273
- A 224 when cut distance is specified 273
- A 225 when head distance is specified 273
- Ct s2000 273
- A 1 when user nv memory capacity is specified 274
- A 2 when nv graphics memory capacity is specified 274
- A 3 when paper width is specified 274
- A 5 when print density is specified 274
- A 6 when printing speed is specified 274
- Basic density 274
- Ct s4000 274
- A 116 when kind of paper is specified 275
- A 201 when ack output position is specified 275
- A 202 input buffer full busy output cancel timing 275
- A 212 when dma direct memory access control of serial communication 275
- A 213 when the flow control of virtual com is specified 275
- A 214 when kanji is specified 275
- Ct s4000 275
- Is specified 275
- A 1 when user nv memory capacity is specified 276
- A 2 when nv graphics memory capacity is specified 276
- A 3 when paper width is specified 276
- A 5 when print density is specified 276
- A 6 when printing speed is specified 276
- Ct s801 ct s851 276
- A 116 when kind of paper is specified 277
- A 201 when ack output position is specified 277
- A 202 input buffer full busy output cancel timing 277
- A 212 when dma direct memory access control of serial communication 277
- A 213 when the flow control of virtual com is specified 277
- A 214 when kanji is specified 277
- A 216 when jis shift jis is specified 277
- Ct s801 ct s851 277
- Is specified 277
- Setting status sending data 277
- A 217 when international character set is specified 278
- A 218 when codepage is specified 278
- A 220 when maximum black mark width is specified 278
- A 221 when maximum black mark page length is specified 278
- A 222 when head margin is specified 278
- Ct s801 ct s851 278
- A 223 when bottom margin is specified 279
- A 224 when cut distance is specified 279
- A 225 when head distance is specified 279
- A 230 when lcd language is specified 279
- A 231 when lcd download characters is specified 279
- A 232 when lcd auto off time is specified 279
- A 233 when key lock is specified 279
- Ct s801 ct s851 279
- A 234 when lcd direction is specified 280
- A 240 when buzzer volume is specified 280
- A 241 when max dot number in 1 head division is specified 280
- A 242 when powered usb max dot number is specified 280
- A 243 when mechanism type is specified 280
- Ct s801 ct s851 280
- A 1 when user nv memory capacity is specified 281
- A 2 when nv graphics memory capacity is specified 281
- A 3 when paper width is specified 281
- A 5 when print density is specified 281
- A 6 when printing speed is specified 281
- Ct s601 ct s651 281
- A 116 when kind of paper is specified 282
- A 201 when ack output position is specified 282
- A 202 input buffer full busy output cancel timing 282
- A 212 when dma direct memory access control of serial communication 282
- A 213 when the flow control of virtual com is specified 282
- A 214 when kanji is specified 282
- A 216 when jis shift jis is specified 282
- Ct s601 ct s651 282
- Is specified 282
- Setting status sending data 282
- A 217 when international character set is specified 283
- A 218 when codepage is specified 283
- A 220 when maximum black mark width is specified 283
- A 221 when maximum black mark page length is specified 283
- A 222 when head margin is specified 283
- Ct s601 ct s651 283
- A 223 when bottom margin is specified 284
- A 224 when cut distance is specified 284
- A 225 when head distance is specified 284
- A 240 when buzzer volume is specified 284
- A 241 when max dot number in 1 head division is specified 284
- A 242 when powered usb max dot number is specified 284
- A 243 when mechanism type is specified 284
- Ct s601 ct s651 284
- A 201 when ack output position is specified 285
- A 202 input buffer full busy output cancel timing 285
- A 5 when print density is specified 285
- A 6 when printing speed is specified 285
- Bd2 2220 285
- A 201 when ack output position is specified 286
- A 202 input buffer full busy output cancel timing 286
- A 5 when print density is specified 286
- A 6 when printing speed is specified 286
- Pmu2xxx 286
- A 220 when maximum black mark width is specified 287
- A 221 when maximum length of black mark page is specified 287
- A 222 when head margin is specified 287
- A 223 when bottom margin is specified 287
- A 224 when cut distance is specified 287
- A 225 when head distance is specified 287
- Pmu2xxx 287
- A 202 inputbufferfullbusyoutput canceltiming 288
- A 220 when maximum black mark width is specified 288
- A 221 when maximum length of black mark page is specified 288
- A 222 when head margin is specified 288
- A 5 whenprintdensityisspecified 288
- A 6 whenprintingspeedisspecified 288
- Pmu2xxxii 288
- A 223 when bottom margin is specified 289
- A 224 when cut distance is specified 289
- A 225 when head distance is specified 289
- Pmu2xxxii 289
- A 130 when the auto retraction time length is specified 290
- A 131 when the time length of bezel led on at waiting is specified 290
- A 132 when the time length of bezel led on at blinking is specified 290
- A 5 whenprintdensityisspecified 290
- A 6 whenprintingspeedisspecified 290
- Bezelledblinking 290
- Bezelledon 290
- Ontime 290
- Pmu2300iii 290
- A 133 when the time length of bezel led off at blinking is specified 291
- A 134 when the state of bezel led at waiting is specified 291
- A 135 when the state of bezel led at printing is specified 291
- A 136 when the state of bezel led at ejecting is specified 291
- A 202 inputbufferfullbusyoutput canceltiming 291
- A 213 whentheflowcontrolofvirtualcomisspecified 291
- A 214 whenkanjiisspecified 291
- Bezelledblinking 291
- Bezelledstate 291
- Offtime 291
- Pmu2300iii 291
- A 216 whenjis shiftjisisspecified 292
- A 217 when international character set is specified 292
- A 218 when codepage is specified 292
- A 220 when maximum black mark width is specified 292
- A 221 when maximum black mark page length is specified 292
- Pmu2300iii 292
- A 222 when head margin is specified 293
- A 223 when bottom margin is specified 293
- A 224 when cut distance is specified 293
- A 225 when head distance is specified 293
- Pmu2300iii 293
- A 213 whentheflowcontrolofvirtualcomisspecified 294
- A 214 whenkanjiisspecified 294
- A 216 whenjis shiftjisisspecified 294
- A 5 whenprintdensityisspecified 294
- A 6 whenprintingspeedisspecified 294
- Ct p29xseries 294
- A 217 when international character set is specified 295
- A 218 when codepage is specified 295
- Ct p29xseries 295
- Ct s280 ct s28 1 ct s2000 ct s4000 bd2 2220 pmuseries ct s310ii 296
- Ct s300 ct s310 ct s801 ct s851 ct s601 ct s651 ct p29xseries 296
- Fn 7 function 7 copying user defined page 296
- Gs e pl ph fn a d1 d2 296
- Bits6through0arenotcharacterdata 297
- Datastructure 9 17 d1d4 d25 d3d6 d27 297
- Fn 8 function8 defining data by thecolumnformat to charactercodepageofworkarea 297
- Gs e pl ph fn y c1 c2 xd1 d y x k 297
- Outline thespecificationwhichiscommontothemodel definesthedataincolumnformatinunitsofcharacteronthecodepageinram operatesonlyinprinterfunctionsettingmode 297
- Range 5 pl ph 256 65535 fn 8 y 2 atselectionoffontc y 3 atselectionofotherthanfontc 128 c1 c2 255 0 x 12 atselectionoffonta 0 x 9 atselectionoffontb 0 x 8 atselectionoffontc 0 d 255 k c2 c1 1 297
- Ct s280 ct s281 ct s2000 ct s4000 bd2 2220 pmuseries ct s310ii 298
- Ct s300 ct s310 ct s801 ct s851 ct s601 ct s651 ct p29xseries 298
- Fn 9 function9 defining data intherasterformat to thecharactercodepageofwork 298
- Gs e pl ph fn x c1 c2 y d1 d x y k 298
- Fn 10 function10 erasing data ofcharactercodepagedata inworkarea 299
- Gs e pl ph fn c1 c2 299
- Default 300
- Fn 11 function11 setting communicationconditions 300
- Gs e pl ph fn a d1 dk 300
- Support b 300
- Doesnotsupport 115200bps 301
- Doesnotsupport 57600bps 301
- Fn 12 function12 sending theset communicationconditions 301
- Gs e pl ph fn a 301
- Support b 301
- At shipment 302
- Fn 255 function255 setting allcontentsset by printerfunctionsetting modeto thestate 302
- Gs e pl ph fn a 302
- Gs k pl ph fn m 303
- Fn 49 function49 setting printing density 304
- Gs k pl ph fn m 304
- Fn 50 function50 setting printing speed 305
- Gs k pl ph fn m 305
- Ct s300 ct s310 306
- Fn 97 function97 setting numberofdivisionsforhead conducting 306
- Gs k pl ph fn m 306
- Gs m pl ph fn m 307
- Fn 1 49 function1 copiestheset valuestored inworkarea to thestoragearea 308
- Fn 2 50 function2 copiestheset valuestored instoragearea to theworkarea 308
- Gs m pl ph fn m 308
- Fn 3 51 function3 specifiestheauto loading functionoftheset valueat initializationto be 309
- Gs m pl ph fn m 309
- Valid orinvalid 309
- Fn 48 function48 selectscharactercolor 310
- Gs n pl ph fn m 310
- Ct s801 ct s851 ct s601 ct s651 ct s310ii 311
- Dimensionalcodecommands 311
- Gs k pl ph cn fn parameter 311
- Among pmu series only pmu2xxxx type ii and iii support this function 312
- Gs1 databar 312
- Gs1databar expanded stacked 312
- Pmu2xxxii pmu2300iii 312
- Fn 65 function65 setting the number of digits of pdf417 313
- Fn 66 function66 setting the number of steps of pdf417 313
- Gs k pl ph cn fn n 313
- Fn 67 function67 setting module width of pdf417 314
- Fn 68 function68 setting the height of step of pdf417 314
- Gs k pl ph cn fn n 314
- Fn 69 function69 setting error correction level of pdf417 315
- Gs k pl ph cn fn m n 315
- Fn 70 function70 setting options for pdf417 316
- Fn 80 function80 storing received data to 2d code data storage area 316
- Gs k pl ph cn fn m 316
- Gs k pl ph cn fn m d1 dk 316
- Fn 81 function81 printing 2d code data in 2d code data storage area 317
- Gs k pl ph cn fn m 317
- Fn 82 function82 sending the size of 2d code data in 2d code data storage area 318
- Gs k pl ph cn fn m 318
- Fn 65 function165 specifying qrcode model 319
- Fn 67 function167 sets the module width of qrcode 319
- Gs k pl ph cn fn n 319
- Gs k pl ph cn fn n1 n2 319
- Fn 69 function169 setting qrcode error correction level 320
- Fn 80 function180 storing received data to 2d code data storage area 320
- Gs k pl ph cn fn m d1 dk 320
- Gs k pl ph cn fn n 320
- Fn 81 function181 printing 2d code data in 2d code data storage area 321
- Gs k pl ph cn fn m 321
- Fn 82 function182 sending the size of 2d code data in 2d code data storage area 322
- Gs k pl ph cn fn m 322
- Fn 67 function367 setting modulewidthof 2d gs1 databar 323
- Fn 71 function371 setting maximumwidthof 2d gs1 databarexpanded stacked 323
- Gs k pl ph cn fn n 323
- Gs k pl ph cn fn nl nh 323
- Fn 80 function380 storing 2d gs1 databardata to 2d codedata storagearea 324
- Fn 81 function381 printing 2d gs1 databar data in2d codedata storagearea 324
- Gs k pl ph cn fn m 324
- Gs k pl ph cn fn m n d1 dk 324
- Fn 82 function382 sending thesizeof2d codedata in2d codedata storagearea 325
- Gs k pl ph cn fn m 325
- Gs r 0 326
- Gs r 1 326
- Presenter bezelcontrolcommands pmu2xxxiiionly 326
- Gs r 2 n t1 t2 327
- Dle enq n 329
- Othercommands 329
- Dle dc4 fn m t specification of fn 1 330
- Dle dc4 fn d1 d7 specification of fn 8 331
- Ff can esc ff esc s esc t esc w gs w g 334
- Esc p m n1 n2 336
- Gs a pl ph n m 337
- Memory switch sitting printing 337
- Pmu2xxxii pmu2300iii ct p29xseries 337
- Ct s280 bd2 2220 338
- Ct s281 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 pmuseries 338
- Ct s281 ct s300 ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 pmuseries ct p29xseries ct s301ii 338
- Gs i n 338
- Ct s280 339
- Ct s281 340
- Ct s300 ct s310 341
- Ct s310ii 342
- Ct s2000 343
- Ct s4000 344
- Ct s801 ct s851 ct s601 ct s651 345
- Bd2 2220 346
- Pmu series 347
- Ct p29x series 348
- Gs p x y 349
- Ct s310 ct s2000 ct s4000 ct s801 ct s851 ct s601 ct s651 ct s301ii 350
- Esc rs 350
- Kanjicodetable 364
- 堯 槇 遙 瑤 378
- Ct s280 379
- Memory switch 379
- Memory switches 379
- Off on 379
- Ct s281 381
- Invalid 381
- Ct s300 383
- Ct s310 384
- Ct s310ii 386
- Ct s2000 388
- Ct s4000 390
- Ct s801 851 392
- Ct s601 651 394
- Bd2 2220 396
- Pmu2xxx 397
- Pmu2xxxii 399
- Pmu2300iii 401
- 1 if interface is parallel or usb buffer size is fixed at 4k bytes regardless of this setting 2 depending on dsw 6 setting 3 depending on dsw 6 setting 404
- Ct p29xseries 404
- Msw2 2 is effective when dsw 1 is set at on valid 404
- Detailsofmemory switches 406
- Msw1 1 setting the power on notify 406
- Msw1 2 input buffer 406
- Msw1 3 busy condition 407
- Msw1 4 receive error character 407
- Msw1 5 cr code 408
- Msw1 6 reserved fixed to off 0 408
- Msw1 7 dsr signal 408
- Msw1 8 init signal 408
- Msw2 1 reserved fixed to on 1 409
- Msw2 2 auto cutter operation 409
- Msw2 3 buffering 409
- Msw2 4 full columns print 410
- Msw2 5 cover close return 410
- Msw2 6 paper width 411
- Msw2 7 reserved fixed to off 0 411
- Msw2 8 pne sensor 411
- Msw3 1 auto cutter return 412
- Msw3 2 clearing cover open error 412
- Msw3 2 paper end signal output at detecting paper near end 412
- Only for ct s801 ct s851 ct s601 ct s651 412
- Outline 412
- Msw3 3 parallel 31 pin 413
- Msw3 4 selecting paper 413
- Msw3 5 column number 413
- Msw3 6 413
- Msw3 7 cbm compatible mode 413
- Msw3 8 cover open during printing 414
- Msw4 1 automatic length measurement 415
- Msw4 2 black mark sensor position 415
- Msw4 2 searching top of form at power on 415
- Off 0 on 1 415
- Power on tof invalid valid 415
- Searching top is disenabled 415
- Searching top is enabled 415
- Set the enabled disabled of the function to search the top of form at power on 415
- This function is invalid when thermal paper is selected on msw4 4 415
- This function is valid only on label models or black mark models 415
- Auto loading 416
- Auto loading is not used 416
- Auto loading is used 416
- Base style 416
- Horizontal style or vertical style with back paper holding 416
- Msw4 2 auto loading only for pmu series 416
- Msw4 3 paper feed cut at closing cover 416
- Msw4 4 base style only for pmu2xxx pmu2xxxii 416
- Msw4 4 paper 416
- Off 0 on 1 416
- Set the base style 416
- Set the enabled disabled of paper auto loading function 416
- 3 inch mechanism 417
- Mechanism mounted 417
- Msw4 5 mechanism mounted only for pmu2xxx pmu2xxxii 0 417
- Msw4 5 position detect 417
- Msw4 6 paper change 417
- Off 0 on 1 417
- Onlabelmodelsor blackmark models auto length measurement can be performed at cover close for 417
- Paper change 417
- Set the mechanism mounted on the printer 417
- Using different paper this memory switch sets this function enabled or disabled 417
- Msw4 6 behavior by cover close 418
- Msw4 7 auto paper select ct s281 unique 418
- Msw4 7 dc3 command function switch ct s280 unique 418
- Msw4 8 forcible partial cut 418
- Msw5 1 buzzer 420
- Msw5 2 basic vertical calculation pitch 420
- Msw5 3 usb mode 420
- Msw5 4 reserved fixed to off 0 420
- Msw5 5 setting the power off notify only for ct s4000 421
- Msw5 6 high quality printing mode 421
- Msw5 6 speed quality 421
- Off 0 on 1 421
- Speed quality speed quality 421
- Disconnected printer enters special power save mode this is usb power save mode 423
- Msw6 1 mode to use with the driver 423
- Msw6 2 character space mode 423
- Msw6 3 usb power save 423
- Select the valid invalid of usb power save mode 423
- Usb power save 423
- When printer is connected to the host through usb if pc power is turned off or usb cable is 423
- Msw7 1 baud rate 424
- Msw7 2 data length 424
- Msw7 3 stop bit 424
- Msw7 4 parity 424
- Msw7 5 flow control 424
- Msw7 6 dma control 425
- Msw7 7 vcom flow control 425
- Appendix 436
- Explanationonpage mode 436
- Overview 436
- Valuessetbyeachcommandinstandardmodeandpagemode 436
- Mappingofprintdataintheprintarea 437
- 0 0 200 439
- Exampleofusingpagemode 439
- Page mode lesson 439
- 0 0 200 441
- Abcdefghijklmnop 441
- Can command 441
- Page mode lesson 441
- Qrst1234567890 441
- Bidirectionalparallelinterface 443
- Overview 443
- Parallelinterfacecommunicationmode 443
- Remarks ct p29x series cannot use this mode 443
- Interfacingphases 444
- Negotiation 445
- Overview 445
- Remarks ct p29x series support nibble mode only 446
- Datacommunicationfromprintertohost 447
- Nibblemode 447
- Bytemode 449
- Deviceid 450
- Termination 451
- Identificationofsend status 452
- Aaaaaaaaaaaaaaaaaa 453
- Bbbbbbbbbbbbbbbb 453
- Cautions on black mark label paper 453
- Ccccccccccccccccc 453
- Eeeeeeeeeeeeeeeeee 453
- Ｅｅｅｅｅｅｅｅｅｅ 453
Похожие устройства
- Citizen PMU2300II Руководство по эксплуатации
- Lessar LS-H07KLA2AB/LU-H07KLA2AB Инструкция по монтажу
- Lessar LS-H07KLA2AB/LU-H07KLA2AB Инструкция по эксплуатации
- Citizen PHU-500 Техническое описание
- Citizen PHU-500 Руководство по эксплуатации
- Citizen PHU-500 Command Reference
- Citizen PHU-500 Инструкция по монтажу
- Lessar LS-H09KLA2AB/LU-H09KLA2AB Инструкция по эксплуатации
- Lessar LS-H09KLA2AB/LU-H09KLA2AB Инструкция по монтажу
- Citizen 350-DPN Техническое описание
- Citizen 350-DPN Руководство по эксплуатации
- Lessar LS-H12KLA2AB/LU-H12KLA2AB Инструкция по монтажу
- Lessar LS-H12KLA2AB/LU-H12KLA2AB Инструкция по эксплуатации
- Lessar LS-H18KLA2AB/LU-H18KLA2AB Инструкция по монтажу
- Lessar LS-H18KLA2AB/LU-H18KLA2AB Инструкция по эксплуатации
- Lessar LS-H24KLA2AB/LU-H24KLA2AB Инструкция по эксплуатации
- Lessar LS-H24KLA2AB/LU-H24KLA2AB Инструкция по монтажу
- Citizen 350DPA Техническое описание
- Citizen 350DPA Руководство по эксплуатации
- Citizen 355-DPN Техническое описание