Karcher K 4.68 MD [12/172] Maintenance and care

Karcher K 4.68 MD [12/172] Maintenance and care
6 English
Danger
The trigger gun is subjected to a recoil force
when the water jet is discharged. Make sure that
you have a firm footing and are also holding the
trigger gun and spray lance firmly.
Î Unlock the lever on the trigger gun.
Î Pull on the lever of the trigger gun; the device
will switch on.
Note: Release the lever of the trigger gun; the
device will switch off again. High pressure re-
mains in the system.
Carrying out the most common cleaning tasks.
The work pressure can be stagelessly regulated
between "Min" and "Max".
Î Release the lever on the trigger gun.
Î Turn the spray lance to the desired position.
For particularly dirty items or areas.
Not suitable for use with detergents.
Please use exclusively KÄRCHER detergents
and care products to carry out the respective
cleaning task, as these were specifically devel-
opped for your appliance. The use of other deter-
gents and care products may lead to premature
wear and can invalidate your warranty claims.
Please obtain information at your local dealer or
request information directly from KÄRCHER.
Î Fill the detergent solution in the detergent
tank (observe dosage instructions on the
packaging of the detergent).
Î Use spray lance with pressure regulation
(Vario Power).
Î Turn the spray lance to "Mix" position.
Note: This will mix the detergent with the wa-
ter stream.
Î Spray the detergent sparingly on the dry sur-
face and allow it to react, but not to dry.
Î Spray off loosened dirt with the high-pres-
sure jet.
Î Release the lever on the trigger gun.
Î Lock the lever on the trigger gun.
Î
During longer breaks (more than 5 minutes), also
turn the appliance off using the "0/OFF" switch.
Î Insert the trigger gun in its holder.
Caution
Only separate the high-pressure hose from the
trigger gun or the appliance while there is no
pressure in the system.
Î After working with detergent, suspend deter-
gent suction hose in a container filled with
clear water, switch the appliance on for
around 1 minute once the spray lance has
been removed and rinse until water runs
clear.
Î Release the lever on the trigger gun.
Î Turn off the appliance "0/OFF".
Î Turn off tap.
Î Press the lever on the trigger gun to release
any remaining pressure in the system.
Î Lock the lever on the trigger gun.
Î Pull out the mains plug.
Î Detach the appliance from the water supply.
Caution: When disconnecting the supply or
high pressure hose, warm water may leak
from the connections after operation.
Î Insert the trigger gun in its holder.
Î Stow away the mains cable, the high-pres-
sure hose and accessory at the appliance.
Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
The appliance is maintenance-free.
Prior to longer periods of storage, e.g. in the win-
ter:
Î Completely drain all water from the appli-
ance: Switch the appliance on with detached
high-pressure hose and detached water sup-
ply (max. 1 minute) and wait, until no more
water exits at the high-pressure connection.
Turn off the appliance.
Î Remove filter from suction hose for deter-
gent and clean under running water.
Î Pull out the sieve in the water connection us-
ing flat-nose pliers and clean under running
water.
Operation
Spray lance with pressure regulation
Spray lance with dirt blaster
Working with detergent
Recommended cleaning method
Interrupting operation
Finish operation
Maintenance and care
Maintenance
Storage
12 Englisch

Содержание

Скачать
Случайные обсуждения

Ответы 0

гудитинеподаетводу
2 года назад