Makita HM0871C — инструкция по разборке и сборке активного динамического виброабсорбера [5/17]

(1) First, disassemble Chuck section as illustrated in Fig. 2, 3 and 4.

(2) Remove Housing cover as illustrated in Fig. 9.

Fig. 9

Fig. 10

[3] DISASSEMBLY/ASSEMBLY

[3]-2 Tool holder section (cont.)

Housing cover

Remove Housing cover by unscrewing

M5x25 Hex socket Head bolt.

Active dynamic vibration absorber

comes into sight.

Insert Screwdriver into the hole of Handle side,

and push Spring guide in Active dynamic vibration

absorber to be stuck as follows:

M5x25 Hex

socket head bolt

Active dynamic vibration

absorber

Spring guide has to be removed from

Crank housing prior to the next step.

Spring guide

Spring guide tilted and stuck

in Pipe holder A

Crank housing

Insert two slotted screwdrivers between Crank housing and

Active dynamic vibration absorber, and then lever up

Active dynamic vibration absorber from Crank housing.

(3) Remove Active dynamic vibration absorbers from the both side of the machine as illustrated in Fig. 10.

[3]-3 Active dynamic vibration absorber (exclusively for HM0871C)

DISASSEMBLING

ASSEMBLING

Short end Long end

Impact bolt

(2) Assemble Tool holder section by taking the reverse step of Fig. 5.

Insert Impact bolt into Tool holder.

Note: Face the short end of Impact bolt to Hammer bit insertion side. See Fig. 8.

(3) Assemble Chuck section by taking reverse step of disassembly. Refer to Figs. 4, 3 and 2.

Fig. 8

Tool holder

Hammer bit

insertion side

P 5/ 17

Repair

Pipe holder A