Acme V130 [8/88] System upgrade

B) Firmware upgrade

In this menu, in pop up dialog box, press “+” or “-” to select

“Yes” or “No”, and then press the “M” button, connect the player

with the PC via USB, the system enters the rmware upgrading

status.

C) Default set

Select this item, a dialog box pops up. Press “+” or “-” to select

“Yes” and press the “M” button to conrm. The player is resumed

to the defaulted value then.

8. System Upgrade

There are two ways to upgrade the rmware:

1) Select “Settings>System>Upgrade” in the main menu, and then

start to upgrade as per the prompt. For details please refer to

Section 10 “Firmware upgrade”.

2) Use the “rmware upgrade tools” in the enclosed CD to upgrade

the rmware.

Operation steps:

A) Turn o the player, press and hold the “M” button, do not release

it, and connect the player with the PC via USB cable.

B) After the player is connected to the PC, the PC prompts “New

hardware found”. Install the driver as per the requirement. USB

device drivers are in CD. (If the driver has been installed, you can

jump over this step directly.)

C) After the driver is installed, run the “Firmware Upgrade” tool in

the enclosed CD.

D) Press “Open rmware”, and then select a rmware le.