Bort BLK-250D-Li [6/24] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bort BLK-250D-Li [6/24] English

Bort BLK-250D-Li [6/24] English
6
Car compressor
Intended Use
This product is used for ination of tires, balls, inatable
air beds, bicycle tires, etc. The car compressor is equipped
with a manometer and an adaptor for connection to the
car cigarette lighter.
TECHNICAL SPECIFICATIONS (1)
Battery voltage / Capacity 12 V/ 1,5 Ah
Max pressure 10,3 bar
Compressor capasity 16 l/min
Battery charging time 3 h
Working zone illumination +
Weight 1,8 kg
PRODUCT DESCRIPTION
1. Air hose with connector;
2. Digital pressure gauge;
3. Set of accessories;
4. LED lights;
5. On / o button;
6. Rubberized handle;
7. Removable battery;
8. 12V adapter.
GENERAL REQUIREMENTS
• Do not leave the car compressor in the rain and snow.
• Do not use the product in highly humid environment.
• Do not work near inammable liquids and gases.
• Do not let children operate the car compressor.
• Keep in a dry and closed place out of reach of children.
• Do not overload the product. Failures caused by overload
are not covered by conditions of free warranty repair.
• Use only for the purpose specied.
• Control operability of the air hose.
• It is prohibited to move the compressor holding it by the
power cable.
• Avoid contact of the hose with oil and sharp objects.
• Avoid overheating of the hose.
• Keep your balance while working.
• Keep the compressor clean. Clean it regularly from oil
stains.
• Disconnect the compressor from the car system voltage
in the following cases:
- The product is not in use.
- During maintenance operations.
- During replacement of parts and mechanical units.
• Be attentive and collected while working.
• Refrain from work, if you are tired or ill.
• Regularly check the product for damages and failures.
• If any defects are detected, contact the service center
• For failure avoidance, do not use spare parts of other
manufacturers.
To prevent failures
• Keep the compressor adapter clean. With the compressor
connected to the car cigarette lighter, in case of short cir-
cuit, a life-threatening situation may occur. Accumulator
capacity is very high, so you can get injured.
• Protect the compressor from overheating. Do not cover
the compressor with foreign objects while in use.
Before connecting, please check
• If the adapter and the car lighter socket match;
• If the car accumulator voltage matches with the com-
pressor’s characteristics;
• If the accumulator can provide 10 A;
• Absence of failures and breakdowns in the cable and the
adapter for the cigarette lighter.
OPERATION
• First, check pressure in the inated object. It can be done
with the manometer, installed in the compressor. Just
connect the hose of the idle compressor to the inated
object.
• Avoid excessive pressurization.
• Do not place the working compressor in the car compart-
ment.
• Do not leave the working compressor unattended.
• Switch o the compressor immediately in the following
cases:
1. If the adapter or power cable is damaged;
2. Smell of burning insulation appears.
ATTENTION! This compressor is intended for short-time
operation (not more than 10 minutes). Longer operation
of the compressor may cause its overheating and break-
down. If you need to use the compressor longer, after rst
10 minutes switch o the device and let it cool down for 10
minutes before restart.
Ination of car tires
• Place the car to ensure the lowest position of the tire
valve.
• Connect the nipple to the tire valve. Push the lever down
English

Содержание

Похожие устройства

Скачать