Bort BLK-250D-Li [7/24] Disposal
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bort BLK-250D-Li [7/24] Disposal

Bort BLK-250D-Li [7/24] Disposal
7
and x the nipple.
• Check pressure with the manometer.
• Connect the compressor to the car lighter socket.
• When the required pressure level is reached, disconnect
the compressor from the car lighter socket.
• Release the lock of the joining nipple and remove it from
the valve.
Ination of balls and toys
• Install the valve adapter (connector or needle for ball in-
ation) on the nipple and latch the lock by pushing the
lever down.
• Connect the air hose with the adapter to the inated
object.
• Connect the compressor to the car lighter socket.
• Turn the compressor on.
• When the required pressure level is reached, disconnect
the compressor from the car lighter socket.
• Disconnect the air hose with the adapter from the in-
ated object.
• Quickly close the air passage of the inated object.
ATTENTION! Control air pressure in the inated object.
Avoid excessive pressurization of the inated object.
MAINTENANCE AND CLEANING
Make sure that the machine is not live when carrying
out maintenance work on the motor.
• Every time after completion of work, it is recommended
to clean the body of the car compressor and its air inlets
from dirt and dust with a cotton cloth or a napkin.
• Persistent impurities must be removed with a cloth
soaked in soapy water.
• It is prohibited to use solvents: alcohol, ammonia solu-
tions, etc. for dirt removal. These uids adversely aect
plastic parts of the compressor.
• The machine requires no additional lubrication.
• Should a fault occur, e.g. after wear of a part, please con-
tact your local BORT GLOBAL LIMITED dealer.
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resources
and protecting the environment by returning this
appliance to the collection centres (if available).
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of the
packaging materials can be recycled. Take these materials
to the appropriate recycling locations. Take your unwanted
machines to your local BORT GLOBAL LIMITED dealer. Here
they will be disposed of in an environmentally safe way.
Noise/Vibration Information
Measured in accordance with EN 60745-2-11 the sound
pressure level of this tool is 82,5 dB(A) and the sound power
level is 93,5 dB(A) (standard deviation: 3 dB).
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards or standard-
ized documents: EN 55014-1, EN 55014-2, in accordance
with the regulations 2006/42/EC, 2006/95/EC, 2004/108/
EC, 2011/65/EU.
TROUBLESHOOTING GUIDE
1. The compressor is not started on
Blown-out fuse in the car
• Replace the blown-out fuse in the fuse box of the car.
Poor contact in the lighter socket
• Clean the lighter socket with a non-metal object.
2. The compressor is working poorly
The car accumulator is discharged
• Start the car.
Poor contact in the lighter socket
• Clean the lighter socket with a non-metal object.

Содержание

Похожие устройства

Скачать