Grundig GIGF 7235220 X [22/80] Maintenance and care

Содержание

Maintenance and care General information Service life of the product will extend and the possibility of problems will decrease if the product is cleaned at regular intervals Disconnect the product from mains supply before starting maintenance and cleaning works There is the risk of electric shock A Allow the product to cool down before you clean it Hot surfaces may cause burns Clean the product thoroughly after each use In this way it will be possible to remove cooking residues more easily thus avoiding these from burning the next time the appliance is used No special cleaning agents are required for cleaning the product Use warm water with washing liquid a soft cloth or sponge to clean the product and wipe it with a dry cloth Always ensure any excess liquid is thoroughly wiped off after cleaning and any spillage is immediately wiped dry Do not use cleaning agents that contain acid or chloride to clean the stainless or inox surfaces and the handle Use a soft cloth with a liquid detergent not abrasive to wipe those parts clean paying attention to sweep in one direction The surface might get damaged by some detergents or cleaning materials Do not use aggressive detergents cleaning powders creams or any sharp objects during cleaning Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface which may result in shattering of the glass O Do not use steam cleaners to clean the appliance as this may cause an electric shock O Cleaning the hob Cleaning the burner 1 Remove the saucepan carriers from the hob 2 Remove all removable parts of the burner and clean only by hand with sponge some detergent and hot water 3 Clean the non removable parts of the burner with a wet cloth 4 Clean the plug and thermal element in models with ignition and thermal element with a slightly moist cloth Afterwards dry with a clean cloth Make sure that flame holes and plug are totally dry Otherwise no spark occurs at the end of ignition 5 When placing the pan supports pay attention to place the pan supports so that the burners are centered Assembling the burner parts After cleaning the burner place the parts as shown below 22 EN

Скачать