Sanitas SFT65 Инструкция по эксплуатации онлайн [25/76] 80629

Measuring body temperature on the forehead

Please note that the forehead/temples must be free from sweat and cosmetics and

that taking vasoconstrictive medication and skin irritations can distort the result

when measuring temperature on the forehead.

Press the • button for 1 second to switch the thermometer on. Following a

successful self test, the device emits two short beeps.

Place the measuring head with the forehead/cover cap ﬁ tted on the temples, •

hold down the button and move the thermometer smoothly over the

forehead to the other temple.

Then release the • button. The end of the measuring time is signalled with a

short beep and the measured value appears on the display.

If the measured value is within the normal range (< 100.4°F/38°C), the green LED lights up for 3 seconds. If

the measured value is higher (≥ 100.4°F/38°C, high temperature), the red LED is illuminated.

Measuring surface temperature

Press the •

button for 1 second to switch the thermometer on. Following a successful self test, the

device emits two short beeps.

Then press the • and buttons simultaneously for 3 seconds to switch to the Object temperature

mode. The symbol appears in the display.

Press and hold the • or button and point the sensor tip towards to the object or liquid to be meas-

ured (never immerse in liquids), maintaining a distance of 3 cm.

Release the • or button. The end of the measuring time is signalled with a short beep and the

measured value appears on the display.

Please note that the displayed temperature is the measured and not the adapted surface temperature. It is

not the same as the forehead/ear temperature.

To switch back to the Ear/Forehead thermometer mode, press the and buttons simultaneously for 3

seconds until the symbol disappears and there is a short beep. By switching the thermometer o and on

again, it automatically exits the Object temperature mode.