Smartmi Standing Fan 3 (ZLBPLDS05ZM) [6/32] Connected
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Smartmi Standing Fan 3 (ZLBPLDS05ZM) [6/32] Connected

Smartmi Standing Fan 3 (ZLBPLDS05ZM) [6/32] Connected
Use
1. Press and hold the and buttons simultaneously for 5 seconds. The 4 wind
speed indicators will begin to flash simultaneously, and will go out once pairing is
successful.
2. When a pairing request is received by the fan, the 4 LEDs on the fan body will begin
to flash. At this point, press any button on the fan to pair. A beep indicates that pairing
has been successful.
3. If no button is pressed on the fan within 30 seconds, pairing will discontinue and the
remote control will stop flashing.
9
Power on
Press the button to start the fan.When it is turned on for the first time,
the wind speed will be set at Level 1.When it is turned on again after being
turned off, the wind speed will default to the level set when last powered on.
Power off
Press and hold the button for 2 seconds to stop the fan.
Features
Screen display
Pairing remote control via Bluetooth
Turning on or off/Adjusting wind speeds
Press the button to set fan oscillation.When the fan is turned off, it will
automatically return to the home position.
Setting oscillation
Wind
speed
Power
off
Level 1 Level 2 Level 3 Level 4
Status
indicators
Indicator offIndicator on
Wi-Fi status indicator
Ionizer status indicator
Wind speed status indicators
Natural breeze status indicator
The ionizer function can be enabled/disabled via the app. When
the fan is turned on for the first time, the function will be enabled
by default.
The natural breeze function can be enabled or disabled via the
app or remote control.
The wind speed can be switched between level 1, 2, 3, and 4. The
corresponding status indicators will illuminate accordingly (refer
to the table below).
Use
If the fan cannot connect to the phone, press and simultaneously
for 5 seconds. A beep indicates that Wi-Fi has been successfully reset.
Resetting Wi-Fi
Wi-Fi status indicator
Pitch
Additional functions
To adjust the fan's pitch,
gently lift or press the
motor or fan cover.
The natural breeze mode and ionizer function can be enabled via the app.
More functions such as "Oscillation angle setting" and "On/off timer" can be
used on the app.
10
Troubleshooting
Connected
Not connected Blinking
Solid
Issue Cause Solution
Fan does not
run
No power is supplied to
power outlet
Use an outlet that has power
Power cord is not connected
properly
Connect power cord correctly
Fan column and base are
not installed properly
Align fan column with the
socket on the base, and fasten
connecting screws
Wi-Fi cannot
be connected
Router is on 5G channel Connect router via 2.4G channel
Mobile app is using up too
much memory
Shut down the app completely
and restart
Fan has been unable to
connect to network for more
than half an hour
Reset Wi-Fi (please refer to
"Resetting Wi-Fi")
Fan blades
stop, fan
beeps three
times, and four
indicators flash
Foreign object stuck in fan
blades
Power off the fan and remove
the foreign object
Motor failure Contact post-sales service
25°up
15°down

Содержание

Похожие устройства

Скачать