Husqvarna LC141C [119/648] Battery charger

Husqvarna LC 141С (9670993-01) [119/648] Battery charger
LED display Possible faults Possible action
Error LED flashes Battery discharged Charge the battery. See
To charge the battery on page
113
.
Temperature deviation Use the battery in surroundings where temperatures are
between -10°C and 40°C.
Over voltage Check that the mains voltage corresponds with that sta-
ted on the rating plate on the product.
Remove the battery from the battery charger. Wait 5 se-
conds and try again to recharge the battery. If the pro-
blem persists, contact an authorised service agent.
Error LED is lit Cell difference too much (1V) Contact an authorised service agent.
Battery charger
LED display Possible faults Possible action
Error LED flashes Temperature deviation Use the battery charger in surroundings where tempera-
tures are between 5°C and 40°C.
Error LED is lit Contact an authorised service agent
Control panel
Keypad Possible faults Possible action
Error LED flashes Overload Increase cutting height. See
To set the cutting height on
page 112
.
If motor speed drops below a cri-
tical value, the motor will stop.
Motor control has overheated Switch off the motor and wait until the motor has cooled
down.
Blade blocked. Prevent unintentional start by turning the safety key to
”0”, removing the battery and waiting at least 5 seconds.
Make sure the blade can rotate freely. If the problem per-
sists, contact an authorised service agent
Battery error or no signal from
battery
Check that the battery is inserted properly and examine
the battery connector. If error LED flashes on the battery,
refer to the troubleshooting for battery. See
Battery on
page 118
.
Machine deactivates Battery discharged Charge the battery. See
To charge the battery on page
113
.
Battery connector failure Examine battery connector
71 - 001 - 03.11.2016 119

Содержание

Похожие устройства

Скачать