Brayer BR3040 [4/17] 7 en en
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR3040 [4/17] 7 en en

Brayer BR3040 [4/17] 7 en en
6 7en en
• Examine the unit for damages, in case of damage
do not plug it into the mains.
• Makesurethatspeciedspecicationsofpower
supply voltage of the unit correspond to the
specicationsofyourmains.Whenusingtheunitin
the mains with 60 Hz frequency, the unit does not
need any additional settings.
• Wipe the unit with a clean, slightly damp cloth to
remove dust, and then wipe it dry.
• Unwind the power cord to its full length while using
the unit.
USING THE HAIRDRYER
• Make sure that the operation mode switch (1) is set
to the position «0».
• Unwind the power cord completely.
• Insert the power plug into the mains socket.
• Use the switch (1) to set the required operation
mode:
- «0» — the hairdryer is off;
- «1» — warm air supply;
- «2» — hot air supply.
• Note: —duringtherstoperationaforeignsmell
and a small amount of smoke can appear from the
heating element, this is normal and it is not covered
by warranty.
• Afternishingoperation,switchthehairdryeroff
by setting the switch (1) to the position «0», and
unplug it.
NOzzLE
• Use the nozzle (3) when you need to focus the
power of drying on a small area (for example, a curl
or a wave) or when you want to straighten wavy hair.
• Attach the nozzle (3) to the unit body. The nozzle (3)
allowsdirectinganarrowairowofhighintensityat
adenitehairlock.
• Insert the power plug into the mains socket. Use the
switch (1) to set the necessary operation mode.
• Periodically straighten the power cord if it gets
twisted during operation.
OvERHEATING PROTECTION
• The overheating protection system switches the
hairdryer off if the outgoing air temperature is above
the limit.
• If the hairdryer is switched off during operation, set
the switch (1) to the position «0», unplug the unit
and make sure that the air inlets and outlets are
unblocked.
• Let the unit cool down for 5-10 minutes and then
switch it on again. Do not block the air inlets during
operation of the hot air styler and
• avoid getting of hair into the air inlet grid (4).
CLEANING AND MAINTENANCE
• The hairdryer is intended for household use only.
• Set the switch (1) to the «0» position, disconnect the
hairdryer from the mains and let it cool down.
• Wipe the unit body (2) with a slightly damp cloth,
and then wipe it dry.
• Clean the air inlet grid (4) with a brush.
• Do not immerse the unit into water or any other
liquids.
• Do not use abrasives and solvents to clean the
nozzle (3) and the unit body (2).
STORAGE
• Disconnect the unit from the mains and clean it.
• Never wind the power cord around the hairdryer
body (2), as it can lead to its damage or damage of
the unit body (2).
• A hanging loop (6) you can hang the hairdryer on is
provided for the ease of storage of the unit, given
that no water will get on it; and you can fold the
handle (5) to minimize the hairdryer size.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
DELIvERY SET
1. Hairdryer — 1 pc.
2. Nozzle — 1 pc.
3. Manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Supply voltage: 220-240 V, ~ 50/60 Hz
• Rated input power: 1200 W
RECYCLING
To prevent possible damage to the environment or harm
to the health of people by uncontrolled waste disposal,
after service life expiration of the unit or the batteries
(if included), do not discard them with usual household
waste, deliver the unit and the batteries to
specialized centers for further recycling.
The waste generated during the disposal of
the unit is subject to mandatory collection
and consequent disposal in the prescribed
manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal
service or to the shop where you purchased this product.
ATTENTION!
Do not use the unit near water in the
bathrooms, showers, swimming pools etc.
The manufacturer reserves the right to change the
design,structureandspecicationsnotaffecting
general principles of the unit operation, without prior
notice.
The Unit Operating Life Is 3 Years.

Содержание

Похожие устройства

Скачать