Brayer BR3133RD [4/15] 7 en en
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR3133RD [4/15] 7 en en

Brayer BR3133RD [4/15] 7 en en
6 7EN EN
• Unwind the power cord completely.
• Remove the protective cover (4). Make sure that the
installed thermal brush (5) is xed properly.
• Set the operation mode switch (1) into the 0 position.
• Insert the power plug into the mains socket.
• Using the switch (1), select the required operation
mode. When the hot air brush is switched on, the light
indicator (3) lights up:
- «0» – the hairdryer is o󰀨
- «C» – «cool air» supply
- «1» – low temperature
- «2» – high temperature
- Buttons < ˃ (2) activate clockwise/counterclockwise
rotation of the thermal brush (5) (5). During the
operation, press and hold down button (2), the brush
(5) will rotate in the required direction.
Note: during the rst use, the heating element may
produce a foreign smell and a small amount of smoke, this
is normal and it is not a warranty event.
• Divide the hair into locks.
• Depending on your hair type, select the necessary
operation mode with the switch (1).
• Wind a hair lock around the installed thermal brush (5),
select the brush (5) rotation direction with the buttons
(2) < ˃; when the hair lock is wound around the brush
(5), release button (2) and the thermal brush (5) will
stop rotating.
• To x the lock, set the operation mode switch (1) to the
position «C», «cool air» supply.
• Switch the hot air brush o󰀨 by setting the operation
mode switch (1) to the position «0».
• Take the hair lock o󰀨 the thermal brush (5),
simultaneously pressing the release buttons (6)
• Place the protective attachment (4) on the thermo brush
(5)
• Notes:
- if you have trouble taking the thermal brush (5) from
the hair, turn the unit o󰀨 by setting the switch (1) to
the position «0», Remove the installed thermo brush
(5) by simultaneously pressing the release buttons (6)
and carefully remove it from the hair lock.
- during operation, avoid contact of the hot surface of
the thermal brush (5) with your face, neck and other
parts of your body.
• After you nish using the unit, set the switch (1) to the
position «0» and unplug the unit.
• Wait until the thermal brush (5) cools down.
• Place the protective attachment (4) on the thermo brush
(5)
OVERHEATING PROTECTION
• The overheating protection switches the unit o󰀨 if the
outgoing air is too hot.
• If the hot air brush turns o󰀨 during operation, set the
switch (1) to the position «0», unplug the unit and make
sure that the air inlets and outlets (8) are unblocked.
• Let the unit cool down for 10-15 minutes and switch it on
again. Do not block the air inlets during the unit operation
and do not let hair be caught into the air inlets (8).
CLEANING AND MAINTENANCE
• The hot air brush is intended for household use only.
• Set the switch (1) to the position «0» and unplug the
unit, wait until the installed thermal brush (5) cools
down.
• Remove the installed thermo brush (5) by
simultaneously pressing the release buttons (6).
• Clean the thermo brush (5) o󰀨 hair and install it back
to its place.
• Wipe the unit body (7) with a slightly damp cloth, and
then wipe it dry.
• Clean the air inlets (8) with a brush (5).
• Do not immerse the unit into water or any other
liquids.
• Do not use abrasives and solvents to clean the unit’s
body (7) and the thermal brushes (5).
STORAGE
• Disconnect the unit from the mains and clean it.
• Never wind the power cord around the hot air brush,
as this can damage the cord or the unit’s body.
• For convenient storage, the hot air brush has a
hanging loop (9) that you can hang it on, provided
that in this position the unit is not exposed to water.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
DELIVERY SET
1. Hot air brush – 1 pc
2. 40 mm diameter thermal brush – 1 pcs
3. Protective attachment – 1 pc.
4. Instruction manual – 1 pc
TECHNICAL SPECIFICATIONS
• Supply voltage: 220-240 V, ~ 50/60 Hz
• Rated input power: 1000 W
ATTENTION!
Do not allow children to play with
polyethylene bags or packaging lm.
Danger of su󰀨ocation!
RECYCLING
To prevent possible damage to the
environment or harm to the health of people
by uncontrolled waste disposal, after service
life expiration of the unit or the batteries (if
included), do not discard them with usual
household waste, deliver the unit and the
batteries to specialized centers for further recycling.
The waste generated during the disposal of the unit is
subject to mandatory collection and consequent disposal
in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal
service or to the shop where you purchased this product.
The manufacturer reserves the right to change the
design, structure and specications not a󰀨ecting
general principles of the unit operation, without prior
notice.
The unit operating life is 3 years

Содержание

Похожие устройства

Скачать