Timberk T-HU2.6-A10M-W [20/44] To keep the unit dry wipe the water after cleaning and dry the unit s base and water tank make sure that there is no water left inside the unit s base and water tank

Содержание

IM2021 To keep the unit dry wipe the water after cleaning and dry the unit s base and water tank Make sure that there is no water left inside the unit s base and water tank Before a long break in use dry the base and the tank but the tank on the base and pack the device in a plastic bag then put it in a box Store the unit in a low humidity room Storing the unit undried results in generation of mold To clean the water tank and parts of the base of the device from salt deposits use citric acid for 1 liter of hot water take 1 tablespoon of citric acid and mix well pour the solution into the tank and put it on the base of the humidifier water from the tank will automatically fall into the base of the device leave the humidifier for 10 12 hours do not turn it on after the time has passed remove the solution from the device along with the exfoliated parts of the salt coating if it is difficult to remove plaque use a special brush for the base of the humidifier if this is not supplied you can use a toothbrush For the tank pour 0 5 1 cups of dry rice into cold water or a cooled citric acid solution and shake until the plaque is peeled off rinse all internal parts of the device with cool water use a humidifier as usual after the procedure 10 TROUBLESHOOTING Malfunction Poor atomizing insufficient productivity Possible cause The unit is operating in the low atomizing mode low atomizing frequency The atomizer is clogged Temperature of water in the tank is low No atomizing There is white patches from the water on objects around the humidifier salts separating out from water Steam has a bad smell The power cord is poorly connected to the outlet White patches have formed on the membrane There is a lot of salts in the water calcium and magnesium Stale water is used Remains of stale water or waste have accumulated in 20 Solution It is not a malfunction Switch the device into the intensive mode of operation Clean the atomizer Set maximum productivity mode The humidifier s productivity will go up after a while Connect the power cord into the outlet carefully Clean the humidifier s membrane with a special brush Use filtered water Clean the unit according to the cleaning and servicing instructions and fill the tank