Home
Главная
Hander
Рубанки
HEP-900R
Инструкция по эксплуатации Страница: 2

Hander HEP-900R [2/38] English

max 60-80%

100%

Planer

INTENDED USE

This tool is intended for planing wooden materials such

as beams and boards; it is also suitable for chamfering

edges and rebating

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1. Safety switch

2. On/off switch

3. Knob for setting planing depth

4. Planing depth indicator

5. Dust port

SAFETY

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock,

ﬁ re and/or serious injury.

• Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

• Always keep the cord away from moving parts of the

tool; direct the cord to the rear away from the tool

• Wait for the cutter block to stop before setting

the tool down (an exposed knife may engage

the surface leading to possible loss of control and

serious injury)

• Use completely unrolled and safe extension cords

with a capacity of 16 Amps (UK 13 Amps)

• In case of electrical or mechanical malfunction,

immediately switch off the tool and disconnect the

plug

• SBM Group can assure ﬂ awless functioning of the

tool only when original accessories are used

• This tool should not be used by people under the age

of 16 years

• The noise level when working can exceed 85 dB(A);

wear ear protection

• Wear a dust protection mask when working with

materials which produce dust that is detrimental

to health; inform yourself beforehand about the

materials to be worked on

• If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect

the plug

• Never use tool when cord is damaged; have it

replaced by a qualiﬁ ed person

• Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool

(tools with a rating of 230V or 240V can also be

connected to a 220V supply)

• If any chip should get jammed in the chip outlet, you

should switch off the motor, ensure that all moving

parts have come to a complete standstill, disconnect

the plug, and remove the jammed chip

• Before using the tool check that the knives do not

brush anywhere

• Keep your ﬁ ngers away from the rotating knives

• Always disconnect plug from power source

before making any adjustment or changing any

accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K.

ONLY):

• Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

• If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left

unattended

Your machine is double insulated in

accordance with EN 50144; therefore no

earthwire is required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These

solvents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most

of the packaging materials can be recycled. Take

these materials to the appropriate recycling locations.

Take your unwanted machines to your local SBM

Group dealer. Here they will be disposed of in an

environmentally safe way.

English

Hander HEP-900R [2/38] English

Содержание

Похожие устройства