![Dewalt DCW604N без акк. и з.у [6/14] Battery packs](/img/pdf.png)
Dewalt DCW604N без акк. и з.у [6/14] Battery packs
![Dewalt DCW604N без акк. и з.у [6/14] Battery packs](/views2/1632887/page6/bg6.png)
38
ENGLISH
drywall screws (purchased separately) at least 25.4mm long
with a screw head diameter of 7–9mm, screwed into wood to
an optimal depth leaving approximately 5.5mm of the screw
exposed. Align the slots on the back of the charger with the
exposed screws and fully engage them in the slots.
Charger Cleaning Instructions
!
WARNING: Shock hazard. Disconnect the charger
from the AC outlet before cleaning. Dirt and grease
may be removed from the exterior of the charger using a
cloth or soft non-metallic brush. Do not use water or any
cleaning solutions. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
Battery Packs
Important Safety Instructions for All Battery
Packs
When ordering replacement battery packs, be sure to include
catalogue number and voltage.
The battery pack is not fully charged out of the carton. Before
using the battery pack and charger, read the safety instructions
below. Then follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use battery in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Inserting or removing the battery from the charger may
ignite the dust or fumes.
• Never force battery pack into charger. Do not modify
battery pack in any way to fit into a non-compatible
charger as battery pack may rupture causing serious
personal injury.
• Charge the battery packs only in DEWALT chargers.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in
locations where the temperature may reach or exceed
40 ˚C (104 ˚F) (such as outside sheds or metal buildings
in summer).
• Do not incinerate the battery pack even if it is severely
damaged or is completely worn out. The battery pack can
explode in a fire. Toxic fumes and materials are created when
lithium-ion battery packs are burned.
• If battery contents come into contact with the skin,
immediately wash area with mild soap and water. If
battery liquid gets into the eye, rinse water over the open eye
for 15 minutes or until irritation ceases. If medical attention
is needed, the battery electrolyte is composed of a mixture of
liquid organic carbonates and lithium salts.
• Contents of opened battery cells may cause respiratory
irritation. Provide fresh air. If symptoms persists, seek medical
attention.
!
WARNING: Burn hazard. Battery liquid may be flammable
if exposed to spark or flame.
!
WARNING: Never attempt to open the battery pack for
any reason. If battery pack case is cracked or damaged,
do not insert into charger. Do not crush, drop or damage
battery pack. Do not use a battery pack or charger that
has received a sharp blow, been dropped, run over or
damaged in any way (i.e., pierced with a nail, hit with
a hammer, stepped on). Electric shock or electrocution
may result. Damaged battery packs should be returned to
service centre for recycling.
!
WARNING: Fire hazard. Do not store or carry the
battery pack so that metal objects can contact
exposed battery terminals. For example, do not place
the battery pack in aprons, pockets, tool boxes, product kit
boxes, drawers, etc., with loose nails, screws, keys, etc.
!
CAUTION: When not in use, place tool on its side on
a stable surface where it will not cause a tripping
or falling hazard. Some tools with large battery packs
will stand upright on the battery pack but may be easily
knocked over.
Transportation
!
WARNING: Fire hazard. Transporting batteries can
possibly cause fire if the battery terminals inadvertently
come in contact with conductive materials. When
transporting batteries, make sure that the battery
terminals are protected and well insulated from materials
that could contact them and cause a short circuit.
NOTE: Lithium-ion batteries should not be put in
checkedbaggage.
DEWALT batteries comply with all applicable shipping
regulations as prescribed by industry and legal standards which
include UN Recommendations on the Transport of Dangerous
Goods; International Air Transport Association (IATA) Dangerous
Goods Regulations, International Maritime Dangerous Goods
(IMDG) Regulations, and the European Agreement Concerning
The International Carriage of Dangerous Goods by Road (ADR).
Lithium-ion cells and batteries have been tested to section 38.3
of the UN Recommendations on the Transport of Dangerous
Goods Manual of Tests and Criteria.
In most instances, shipping a DEWALT battery pack will be
excepted from being classified as a fully regulated Class 9
Hazardous Material. In general, only shipments containing a
lithium-ion battery with an energy rating greater than 100 Watt
Hours (Wh) will require being shipped as fully regulated Class 9.
All lithium-ion batteries have the Watt Hour rating marked on
the pack. Furthermore, due to regulation complexities, DEWALT
does not recommend air shipping lithium-ion battery packs
alone regardless of Watt Hour rating. Shipments of tools with
batteries (combo kits) can be air shipped as excepted if the Watt
Hour rating of the battery pack is no greater than 100 Whr.
Regardless of whether a shipment is considered excepted
or fully regulated, it is the shipper's responsibility to consult
the latest regulations for packaging, labeling/marking and
documentation requirements.
The information provided in this section of the manual is
provided in good faith and believed to be accurate at the time
the document was created. However, no warranty, expressed or
implied, is given. It is the buyer’s responsibility to ensure that its
activities comply with the applicable regulations.
Содержание
- Congratulations 1
- Definitions safety guidelines 1
- Ec declaration of conformity 1
- Machinery directive 1
- Plunge router dcw600 dcw604 1
- Technical data 1
- Electrical safety 2
- General power tool safety warnings 2
- Personal safety 2
- Save all warnings and instructions for future reference 2
- Work area safety 2
- Additional specific safety rules for compact routers 3
- Battery tool use and care 3
- Power tool use and care 3
- Service 3
- Chargers 4
- Electrical safety 4
- Important safety instructions for all battery chargers 4
- Mains plug replacement u k ireland only 4
- Residual risks 4
- Save these instructions 4
- Using an extension cable 4
- Charger operation 5
- Charging a battery fig c 5
- Wall mounting 5
- Battery packs 6
- Charger cleaning instructions 6
- Important safety instructions for all battery packs 6
- Read all instructions 6
- Transportation 6
- Battery type 7
- Labels on charger and battery pack 7
- Package contents 7
- Storage recommendations 7
- Assembly and adjustments 8
- Bit installation and removal fig d 8
- Date code position fig c 8
- Description fig a 8
- Fuel gauge battery packs fig c 8
- Inserting and removing the battery pack from the tool fig c 8
- Intended use 8
- Markings on tool 8
- To install the battery pack into the tool handle 8
- To install the bit 8
- To remove the battery pack from the tool 8
- Centreing the subbase fig a f1 f3 9
- Collets 9
- Installing a fixed base parallel fence fig g 9
- Locking lever adjustment fig e 9
- To remove the bit 9
- To use template guides 9
- Using template guides 9
- Adjusting the depth of cut fig l 10
- Adjusting the parallel fence fig a h 10
- Attaching a dust extraction system to the fixed base fig i 10
- Attaching a dust extraction system to the plunge base dcw604 only fig j 10
- Inserting the motor into the fixed base 10
- Inserting the motor into the plunge base 10
- Installing a plunge base parallel fence with guide rods dcw604 only fig h 10
- Removing the motor from the fixed base fig k 10
- Set up fixed base fig a k l 10
- Set up plunge base dcw604 only fig a m 10
- Adjusting the plunge routing depth fig m 11
- Fine adjustment of routing depth fig m 11
- Operation instructions for use 11
- Proper hand position fig n1 n2 11
- Removing the motor from the plunge base fig m 11
- Starting and stopping the motor fig a 11
- Using the rotating turret for stepped cuts fig m 11
- Choosing router speed fig a 12
- Cutting with the fixed base fig c 12
- Cutting with the plunge base dcw604 only fig a 12
- Direction of feed fig o 12
- Lubrication 12
- Maintenance 12
- Soft start feature 12
- Variable speed control fig a 12
- Worklights fig a 12
- Cleanin 13
- Optional accessories 13
- Protecting the environment 13
- Rechargeable battery pack 13
- Waxing motor and base 13
- Datos técnicos 14
- Declaración de conformidad ce 14
- Definiciones normas de seguridad 14
- Directriz de la maquinaria 14
- Directriz de la maquinaria dcw600 dcw604 14
- Enhorabuena 14
- Fresadora inalámbrica sin escobillas dcw600 dcw604 14
Похожие устройства
- Jet JRD-920A Инструкция по эксплуатации
- Dewalt DWS727-QS Инструкция по эксплуатации
- Вентс МВ 101 Вс (10039937) Инструкция по эксплуатации
- Вентс МВ 125 -1с (Р) (1000142481) Инструкция по эксплуатации
- РВС РВ 125с (1F00000007311) Инструкция по эксплуатации
- Texas ST1300 Инструкция по эксплуатации
- Denzel 96611 Инструкция по эксплуатации
- Jet JPT-310HH (10000292M) Инструкция по эксплуатации
- Кратон HPWA-2500 Инструкция по эксплуатации
- Кратон HPW-2000 Инструкция по эксплуатации
- Кратон HPW-1600 Инструкция по эксплуатации
- Denzel 58232 Инструкция по эксплуатации
- Denzel 58233 Инструкция по эксплуатации
- Denzel 58234 Инструкция по эксплуатации
- Dewalt DCM575N без АКБ и ЗУ Инструкция по эксплуатации
- SUN POWER Film SPF 50-180-6 (комплект) Инструкция по эксплуатации
- Wagner HEA N517 (517517) Инструкция по эксплуатации
- Union ОР-5Р Инструкция по эксплуатации