Denzel AG230-2400 [6/32] Angle grinder
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel AG230-2400 [6/32] Angle grinder

Denzel AG230-2400 [6/32] Angle grinder
6
ANGLE GRINDER
EN
Maintenance
a) Your electric tool must be repaired only by qualied specialists using original spare parts. This will ensure safety
and reliability of your electric tool in further use.
Additional Security Rules when working with Angle Grinder
General warning instructions for grinding
a) Angle grinders are designed for grinding with abrasive wheels, sandpaper, for works with wire brushes and as
a detachable grinder. Observe all warnings and instructions that you get with a power tool. Failure to follow
directions may result in electric shock, re and / or serious injury.
b) Do not use tooling or accessories which are not provided by the manufacturer specically for this type of tool
and not recommended by the manufacturer. Only physical ability to attach a tooling on your power tool does
not guarantee its safe and reliable use.
c) Allowable tooling speed must be at least the maximum number of rotation speed specied on the electric
machine. Tooling, rotating with greater than acceptable speed, may tear o and cause serious injury.
d) The outer diameter and thickness of the tooling must match the size of your electric machine. Tooling of the
wrong size cannot be safe to operate and properly monitored.
e) Grinding wheels, anges, grinding plates or other accessories must t tightly on the spindle of your electric
machine. Tooling, mounted on the spindle with backlash, leads to strong vibration and loss of control over the
machine.
f) Do not use damaged tooling to avoid serious injury. Each time before use check grinding wheels for chips and
cracks, grinding plates for cracks, risks or heavy wear, wire brushes on loose or broken elements.
g) Use personal protective equipment. Depending on the work performed use a face shield, eye protection or
protective glasses. If necessary, use a dust respirator, hearing protection, protective gloves or a special apron,
which protects against sparks, abrasive particles and material particles.
h) Ensure that unauthorized persons are at a safe distance from the work area. Shards of parts or tooling, in case of
its rupture, can y to the side and cause injury even at a considerable distance from the work site.
i) Hold the electric machine only on the insulated surface of the handles if you are doing work, in which the
equipment can get on the hidden wiring or own power cord. Contact with a current-carrying wire puts under
voltage all metal parts of the electric tool and leads to electric shock.
j) Keep the power cord away from the rotating tooling. If you lose control of your electric machine, the power cord
may be cut or grabbed by the rotating tooling.
k) Never let an electric machine out of your hands, until the tooling stops completely. Rotating tooling can catch
on supporting surface or other object and, as a result, you may lose control of the electric machine.
l) Regularly clean the vents of the electric machine. The engine fan draws dust into the case and large amounts of
metallic dust can cause the tool to fail.
m) Do not use accessories that require the use of coolants. The use of water or other coolants can cause damage
to the electric machine and electric shock.
n) Hold the electric machine tight and take a position in which you can counteract the reverse forces. Always use
the extra handle to best counteract reverse forces or the reactionary moment of recruitment.
o) Be especially careful on corners, sharp edges, etc. Prevent a tooling bounce from the workpiece and its jamming.
A possible rebound and jamming of the tooling causes loss of control or kickback.
p) When processing stone, use dust suction. The vacuum cleaner must be adapted to work with stone dust. Using
these devices reduces the risk of exposure to dust.
Special warnings for grinding and cutting
a) Use abrasive tools recommended exclusively for your electric machine and protective covers provided for them.
Abrasive tools not provided for this electric machine may not be safe enough.
b) The protective cover must be securely fastened to the electrical machine and congured to achieve the highest
degree of security, it means, in the direction of the operator should be open as little as possible part of tooling.
The protective cover should protect the operator from splintering and accidental contact with the tooling.

Содержание

Похожие устройства

Скачать