Denzel MTL-IB-18-02 [11/28] Cordless multifunctional tool
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel MTL-IB-18-02 [11/28] Cordless multifunctional tool

Denzel MTL-IB-18-02 [11/28] Cordless multifunctional tool
11
CORDLESS MULTIFUNCTIONAL TOOL
EN
•
always use the machine only for the types of work for which it is intended. When processing, use only the designated
tooling which is absolutely safe;
•
do not allow mechanical damage, shock, falling of the tool on hard surfaces, etc.;
•
protect the machine from exposure to intense heat sources or chemically active substances, as well as from
the ingress of liquids and foreign solid objects inside the machine;
•
ensure eective removal of processing products from the cutting zone;
•
do not block or obstruct the ventilation openings in the machine case;
•
turn the machine o using the power switch before connecting / disconnecting the battery;
•
monitor the condition of the tooling and the heating of the electric motor.
At the end of the work:
•
disconnect the tool from the power supply, making sure the switch is in the “o” position;
•
clean the machine and accessories from dirt.
Recommendations for use
Before you start processing a part, you must x it, especially if it has a light weight.
Keep in mind that heavy or rigidly xed on a massive base workpieces are processed more eciently.
In the process, the machine creates signicant vibrations, use anti-vibration gloves. Do not overheat the exterior
of the machine during prolonged use. If overheated, stop working, let the machine work without load for 30 ... 60
seconds to cool the engine, turn o the engine and take a break to cool down the actuator housing.
Do not allow the machine to work when there is unwanted or unusual noise in the engine or mechanism. If noise
appears, turn o the machine and contact to an authorized service.
NOISE AND VIBRATION
Noise and vibration characteristics are given in the table №1.
However, if the tool is used for other work with the use of working tools, not provided by the manufacturer,
or maintenance will not meet the requirements, then the vibration level may be dierent.
ATTENTION!
Always use personal hearing protection.
MAINTENANCE
ATTENTION!
Before starting maintenance work and setting up the tool disconnect the battery. To ensure
quality and safe functioning keep your tool and vents clean at all times.
If you have noticed a decrease in the eciency of the tool, extraneous noise or smell then you must contact
the service center for timely diagnosis and repair.
Tooling maintenance
The use of the worn working tool reduces the eectiveness of the work and may result in motor or gearbox failure,
so you need to sharpen periodically or replace worn removable tools, as soon as there is a need.
Electric motor care
You must be especially careful with the electric motor, avoid getting liquids and foreign objects inside the case.
Keep your ventilation holes clean, blow them regularly with compressed air or clean them with a brush. When
noticeable sparks appear, contact an authorized service center for diagnostics and possibly replacement of carbon
brushes.

Содержание

Похожие устройства

Скачать