Denzel MTL-IB-18-02 [7/28] Cordless multifunctional tool

CORDLESS MULTIFUNCTIONAL TOOL

f) Do not use accessories that require the use of coolants. The use of water or other coolants can cause damage

to the electric machine.

g) Hold the electric machine tight and take a position in which you can counteract the reverse forces. Always use

the extra handle to best counteract reverse forces or the reactionary moments.

h) Be especially careful on corners, sharp edges, etc. Prevent a tooling bounce from the workpiece and its jamming.

A possible rebound and jamming of the tooling causes loss of control or kickback.

i) Use dust suction when processing stone. The vacuum cleaner must be adapted to work with stone dust. Using

these devices reduces the risk of exposure to dust.

Special warnings for grinding and cutting

а) Use abrasive tools recommended exclusively for your electric machine. Abrasive tools not provided for this

electric machine may not be safe enough.

b) Abrasive tools may only be used for their intended purpose. Never sand by the side of the cutting disc. Cutting

discs are designed for cutting material by edge. Other use of the disk may lead to its destruction and injury.

Special warnings when sanding

Do not use oversized sanding sheets and follow the manufacturer's specications for sanding sheets. Sanding

sheets that protrude beyond the edge of the sanding pad, may cause injury and blockage, tear or back kick.

Residual risks

Despite compliance with the relevant safety instructions and the use of safety devices, some residual risks cannot

be completely eliminated. These include:

•

injuries caused by touching hot or rotating instrument parts or workpiece;

•

risk of pinching ngers when changing working tool;

•

damage to health due to vibration appearing at work.