Kress KU436P [13/24] Trouble shooting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kress KU436P [13/24] Trouble shooting

Kress KU436P [13/24] Trouble shooting
13
EN
TROUBLE SHOOTING
Symptom Possible Causes Possible Solution
Tool will not start when
operating the on/off switch.
Power cord not plugged in.
Power cord is broken.
Carbon brush has worn down
Check to make sure power cord is connected
well into a working outlet.
Unplug the power cord. Replace it using a
qualified maintenance person.
Replace the carbon brush using a qualified
maintenance person.
Cutting depth is less than
that is set.
Sawdust accumulated at the rear
of the base.
Shake out sawdust. Consider connecting a
vacuum for dust collection.
Blade spins or slips
Blade is not tightly engaged with
the spindle.
Remove the blade, and reassemble it as
described in INSTALL /CHANGE THE
BLADE section.
Blade will not cut a straight
line.
Blade is dull.
Blade is not mounted properly.
Saw is not being guided properly.
Mount a new, sharp blade on the saw.
Check that blade is properly mounted.
Use a parallel guide.
Blade kicks back when
beginning a cut
Blade is not spinning fast enough
Allow the saw blade to reach full speed prior to
beginning a cut in the material.

Содержание

Похожие устройства

Скачать