Makita Перфоратор HR4501C +Отвертка аккумуляторная 6723DW [7/12] Bit angle when chipping scaling or demolishing

Installing or removing the bit

003150

Clean the bit shank and apply bit grease before installing

the bit.

Insert the bit into the tool. Turn the bit and push it in until

it engages.

006318

If the bit cannot be pushed in, remove the bit. Pull the

chuck cover down a couple of times. Then insert the bit

again. Turn the bit and push it in until it engages.

After installing, always make sure that the bit is securely

held in place by trying to pull it out.

To remove the bit, pull the chuck cover down all the way

and pull the bit out.

006333

Bit angle (when chipping, scaling or

demolishing)

HR4501C

HR4510C

008362

HR4511C

008367

The bit can be secured at 12 different angles. To change

the bit angle, depress the lock button and rotate the

change lever so that the pointer points to the

symbol.

Turn the bit to the desired angle.

Depress the lock button and rotate the change lever so

that the pointer points to the

symbol. Then make sure

that the bit is securely held in place by turning it slightly.

HR4501C

HR4510C

008363

HR4511C

008368

1. Pointer

2. Change lever

3. Lock button

1. Change lever

2. Pointer

3. Lock button

1. Pointer

2. Change lever

3. Lock button

1. Change lever

2. Pointer

3. Lock button

1. Bit

2. Chuck cover

1. Bit

2. Chuck cover

1. Bit shank

2. Bit grease

Makita Перфоратор HR4501C +Отвертка аккумуляторная 6723DW [7/12] Bit angle when chipping scaling or demolishing

Содержание

Похожие устройства