Sinbo SHC-4346 Инструкция по эксплуатации онлайн [9/44] 83952

- 8 -

Oiling the cutting head

Remove the guide comb from the trimmer.

Remove the cutting head by pushing it backwards as shown.

Press the white catch and squeeze one to two drops of oil between each pair of cutting

teeth.

Click the catch back into place and push it with the cutting teeth to and fro to spread the

oil.

Replace the culling head by sliding the cutting head clip into the notch on the cover of

the trimmer until you hear it snap into place.

Remove any excess oil by wiping with a cloth.

If the oil supplied with the trimmer should run out. use only acid-free oil such as sewing

machine oil.

Replacing the cutting head

Use only original accessories. You can obtain accessories such as the cutting head, the

guide comb in specialist shops. Do not attempt to sharpen the cutting head yourself!

Switch the trimmer off! Replace the cutting head as described under "Oiling the cutting

head".

Replacing the accus

The appliance has nickel metallic hydride accus. If they supply power for only a short

period after charging, you can replace them.

Use one accus of the type size AA, 1.2V.

Always replace both accus at the same time.

TECHNICAL SPECIFICATIONS

Watts: 2W

Voltage: AC230V, 50HZ

FEATURES

• Cordless operation

• Stainless steel blades

• Built in Ni-Cd battery

• 8 Hours charging time

• Indication light in blue color

• Built-in guider

• Accessories: With oil, comb, scissors ,brush, charging cable and plug

We reserve the right to make technical and design changes in the course of product

improvements.

ENVIRONMENT FRIENDLY DISPOSAL

You can help protect the environment!

Please remember to respect the local regulations: hand in the non-working electrical

equipments to an appropriate waste disposal center.