![Graco Reactor 3 E-20 26R312 [6/36] Important isocyanate iso information](/img/pdf.png)
Graco Reactor 3 E-20 26R312 [6/36] Important isocyanate iso information
![Graco Reactor 3 E-20 26R312 [6/36] Important isocyanate iso information](/views2/1900372/page6/bg6.png)
Important Isocyanate (ISO) Information
6 309577Y
Important Isocyanate (ISO) Information
Isocyanates (ISO) are catalysts used in two component materials.
Isocyanate Conditions
Spraying or dispensing fluids that contain isocyanates creates potentially harmful mists, vapors, and atomized
particulates.
• Read and understand the fluid manufacturer’s warnings and Safety Data Sheet (SDS) to know specific
hazards and precautions related to isocyanates.
• Use of isocyanates involves potentially hazardous procedures. Do not spray with this equipment unless you
are trained, qualified, and have read and understood the information in this manual and in the fluid
manufacturer’s application instructions and SDS.
• Use of incorrectly maintained or mis-adjusted equipment may result in improperly cured material.which
could cause off gassing and offensive odors. Equipment must be carefully maintained and adjusted
according to instructions in the manual.
• To prevent inhalation of isocyanate mists, vapors and atomized particulates, everyone in the work area must
wear appropriate respiratory protection. Always wear a properly fitting respirator, which may include a
supplied-air respirator. Ventilate the work area according to instructions in the fluid manufacturer’s SDS.
• Avoid all skin contact with isocyanates. Everyone in the work area must wear chemically impermeable
gloves, protective clothing and foot coverings as recommended by the fluid manufacturer and local
regulatory authority. Follow all fluid manufacturer recommendations, including those regarding handling of
contaminated clothing. After spraying, wash hands and face before eating or drinking.
• Hazard from exposure to isocyanates continues after spraying. Anyone without appropriate personal
protective equipment must stay out of the work area during application and after application for the time
period specified by the fluid manufacturer. Generally this time period is at least 24 hours.
• Warn others who may enter work area of hazard from exposure to isocyanates. Follow the
recommendations of the fluid manufacturer and local regulatory authority. Posting a placard such as the
following outside the work area is recommended:
TOXIC FUMES
HAZARD
DO NOT ENTER DURING
SPRAY FOAM APPLICATION
OR FOR ___ HOURS AFTER
APPLICATION IS COMPLETE
DO NOT ENTER UNTIL:
DATE:
TIME:
____________
____________
Содержание
- Air and electric proportioners for professional use only 1
- Displacement pump 1
- For use with reacto 1
- Important safety instructions 1
- Instructions 1
- Contents 2
- Model numbers 2
- Related manuals 2
- Warning 3
- Warnings 3
- Warning 4
- Warning 5
- Important isocyanate iso information 6
- Isocyanate conditions 6
- Changing materials 7
- Foam resins with 245 fa blowing agents 7
- Keep components a and b separate 7
- Moisture sensitivity of isocyanates 7
- Pressure relief procedure 8
- Repair 8
- Clean and inspect parts 9
- Fill the wet cups 9
- Repair kits 9
- Tools needed 9
- Component a iso pump 10
- Cutaway views 10
- 245972 18d010 11
- 262648 24y174 11
- Component b resin pump 11
- Disassemble the pump 12
- Reassemble the pump 15
- Component a iso pumps with wet cup flush feature 20
- Component b resin pumps 28
- Note these pumps were also used on component a iso side of reactors built before may 2003 28
- Part 245970 e 20 and e xp1 includes items 1 7 9 23 part 245971 e xp2 includes items 1 7 9 22 part 262648 a 25 includes items 1 7 9 22 part 245972 e 30 includes items 1 22 shown part 24y174 a xp1 includes items 1 7 9 22 part 18d010 reactor 3 e 20 includes items 1 17 19 22 28
- Parts included in pump repair kits purchase separately some parts in the kit may not be used in your pump order the correct kit for your pump from the table below 30
- Pump part repair kit 245970 246420 245971 262648 246421 245972 246422 24y174 17k352 18d010 18e196 30
- Wet cup conversion kits may be purchased separately to convert pumps 245970 245971 262648 and 245972 see page 33 for further information 30
- Accessories 33
- Iso pump oil 33
- Reservoir kit 33
- Throat seal liquid 33
- Wet cup conversion kits 33
- Displacement pump 34
- Technical specifications 34
- California proposition 65 35
- California residents 35
- Warning cancer and reproductive harm www p65warnings ca gov 35
- For the latest information about graco products visit www graco com for patent information see www graco com patents 36
- Graco headquarters minneapolis international offices belgium china japan korea 36
- Graco inc and subsidiaries p o box 1441 minneapolis mn 55440 1441 usa copyright 2003 graco inc all graco manufacturing locations are registered to iso 9001 www graco com revision 36
- Graco information 36
- Graco standard warranty 36
- March 2022 36
- To place an order contact your graco distributor or call to identify the nearest distributor phone 612 623 6921 or toll free 1 800 328 0211 fax 612 378 3505 36
Похожие устройства
- Graco Reactor 3 E-20 26R313 Инструкция по эксплуатации
- Graco Reactor 3 E-20 26R313 Брошюра
- Graco Reactor 3 E-20 26R313 Сертификат
- Graco Reactor 3 E-20 26R313 Техническая документация
- Graco Reactor 3 E-20 CHR312 Инструкция по эксплуатации
- Graco Reactor 3 E-20 CHR312 Брошюра
- Graco Reactor 3 E-20 CHR312 Сертификат
- Graco Reactor 3 E-20 CHR312 Техническая документация
- Graco Reactor 3 E-20 CSR312 Инструкция по эксплуатации
- Graco Reactor 3 E-20 CSR312 Брошюра
- Graco Reactor 3 E-20 CSR312 Сертификат
- Graco Reactor 3 E-20 CSR312 Техническая документация
- Graco Reactor 3 E-20 EHR310 Инструкция по эксплуатации
- Graco Reactor 3 E-20 EHR310 Брошюра
- Graco Reactor 3 E-20 EHR310 Сертификат
- Graco Reactor 3 E-20 EHR310 Техническая документация
- Graco Reactor 3 E-20 EHR311 Инструкция по эксплуатации
- Graco Reactor 3 E-20 EHR311 Брошюра
- Graco Reactor 3 E-20 EHR311 Сертификат
- Graco Reactor 3 E-20 EHR311 Техническая документация