Gigabyte B660M AORUS ELITE DDR4 [35/38] Regulatory notices
![Gigabyte B660M AORUS ELITE DDR4 [35/38] Regulatory notices](/views2/1919659/page35/bg23.png)
- 35 -
Antenna use:
In order to comply with FCC RF exposure limits, low gain integrated
antennas should be located at a minimum distance of 7.9 inches (20 cm)
or more from the body of all persons.
Explosive Device Proximity Warning
Warning: Do not operate a portable transmitter (such as a wireless network
device) near unshielded blasting caps or in an explosive environment
unless the device has been modied to be qualied for such use.
Antenna Warning
The wireless adapter is not designed for use with high-gain antennas.
Use On Aircraft Caution
Caution: Regulations of the FCC and FAA prohibit airborne operation of
radio-frequency wireless devices because their signals could interfere with
critical aircraft instruments.
Other Wireless Devices
Safety Notices for Other Devices in the Wireless Network: Refer to the
documentation supplied with wireless Ethernet adapters or other devices
in the wireless network.
Canada, Canada-Industry Notice:
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Cet appareil est conforme aux normes Canada d'Industrie de RSS
permis-exempt. L'utilisation est assujetti aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted
to indoor use due to its operation in the 5.15-to 5.25-GHz frequency
range. Industry Canada requires this product to be used indoors for the
frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for
harmful interference to co-channel mobile satellite systems. High power
radar is allocated as the primary user of the 5.25-to 5.35-GHz and 5.65 to
5.85-GHz bands. These radar stations can cause interference with and/or
damage to this device. The maximum allowed antenna gain for use with
this device is 6dBi in order tocomply with the E.I.R.P limit for the 5.25-to
5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. To
comply with RF exposure requirements all antennas should be located at a
minimum distance of 20cm, or the minimum separation distance allowed
by the module approval, from the body of all persons.
Attention: l'utilisation d'un réseau sans l IEEE802.11a est restreinte à
une utilisation en intérieur à cause du fonctionnement dansla bande de
fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit
utilisé à l'intérieur des bâtiments pour la bande de fréquence 5.15-5.25
GHz an de réduire les possibilités d'interférences nuisibles aux canaux
co-existants des systèmes de transmission satellites. Les radars de
puissances ont fait l'objet d'une allocation primaire de fréquences dans
les bandes 5.25-5.35 GHz et 5.65-5.85 GHz. Ces stations radar peuvent
créer des interférences avec ce produit et/ou lui être nuisible. Le gain
d'antenne maximum permissible pour une utilisation avec ce produit est de
6 dBi an d'être conforme aux limites de puissance isotropique rayonnée
équivalente (P.I.R.E.) applicable.
dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement
point-à-point. Pour se conformer aux conditions d'exposition de RF toutes
les antennes devraient être localisées à une distance minimum de 20 cm,
ou la distance de séparation minimum permise par l'approbation du module,
du corps de toutes les personnes.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for
the transmitter by Industry Canada. To reduce potential radio interference
to other users, the antenna type and its gain should be chosen so that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal
(ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radio électrique à l'intention des
autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted
by FCC certied equipment. The Intel PRO/Wireless 5000 LAN products meet the Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/
IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC's
recommended limits.
The following safety precautions should be observed:
• Do not touch or move antenna while the unit is transmitting or receiving.
• Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face
or eyes, while transmitting.
• Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged.
• Use in specic environments:
- The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments.
- The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).
- The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: Motherboard
Trade Name: GIGABYTE
Model Number: B660M A ELITE AX DDR4 / B660M A ELITE DDR4
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Содержание
- B660m a elite ax ddr4 1
- B660m a elite ddr4 1
- B660m aorus elite ax ddr4 1
- B660m aorus elite ddr4 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 product introduction 3
- Chapter 2 hardware installation 3
- Chapter 3 bios setup 0 3
- Chapter 4 installing the operating system and drivers 2 3
- Chapter 5 appendix 4 3
- Table of contents 3
- 1 motherboard layout 4
- Atx_12v_2x2 4
- B660m aorus elite ax ddr4 4
- B660m aorus elite ddr4 4
- Chapter 1 product introduction 4
- J only for b660m aorus elite ax ddr4 4
- Temperature sensor 4
- 2 box contents 5
- 1 installation precautions 6
- Chapter 2 hardware installation 6
- 2 product specifications 7
- 2 productspecifications 7
- 3 installing the cpu and cpu cooler 11
- A note the cpu orientation 11
- B installing the cpu 12
- Do not force to engage the cpu socket locking lever when the cpu is not installed correctly as this would damage the cpu and cpu socket 12
- Follow the steps below to correctly install the cpu into the motherboard cpu socket 12
- Be sure to install the cpu cooler after installing the cpu actual installation process may differ depending the cpu cooler to be used refer to the user s manual for your cpu cooler 13
- C installing the cpu cooler 13
- 4 installing the memory 14
- Dualchannelmemoryconfiguration 14
- 5 installing an expansion card 15
- 6 back panel connectors 16
- Displayport 16
- Hdmi 2 port 16
- Port with usb 3 gen 2 support 16
- Rj 45 lan port 16
- Sma antenna connectors 2t2r j 16
- Usb 2 1 port 16
- Usb 3 gen 2 type a port red q flash plus port 16
- Usb type 16
- Audio jack configurations 17
- Line out front speaker out 17
- Mic in rear speaker out 17
- Optical s pdif out connector 17
- Please visit gigabyte s website for details on configuring the audio software 17
- Prevent an electrical short inside the cable connector 17
- The line out jack 17
- The mic in jack 17
- The usb 3 gen 1 port supports the usb 3 gen 1 specification and is compatible to the usb 2 specification use this port for usb devices 17
- This connector provides digital audio out to an external audio system that supports digital optical audio before using this feature ensure that your audio system provides an optical digital audio in connector 17
- Usb 3 gen 1 port 17
- When removing the cable connected to a back panel connector first remove the cable from 17
- When removing the cable pull it straight out from the connector do not rock it side to side to 17
- You can change the functionality of an audio jack using the audio software to configure 7 channel audio access the audio software for audio settings 17
- Your device and then remove it from the motherboard 17
- 7 internal connectors 18
- 2 atx_12v_2x2 atx_12v_2x4 atx 2x2 2x4 12v power connectors and 2x12 main 19
- Power connector 19
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 19
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 19
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 19
- 4 cpu_fan sys_fan1 2 3 fan headers 20
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 20
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 20
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 20
- Connect your rgb led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 12v of this header incorrect connection may lead to the damage of the led strip 20
- For how to turn on off the lights of the led strip please navigate to the unique features page of gigabyte s website 20
- Led_c1 led_c2 rgb led strip headers 20
- Overheating overheating may result in damage to the cpu or the system may hang 20
- The headers can be used to connect a standard 5050 rgb led strip 12v g r b with maximum power rating of 2a 12v and maximum length of 2m 20
- These fan headers are not configuration jumper blocks do not place a jumper cap on the headers 20
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 21
- Chipset supports raid 0 raid 1 raid 5 and raid 10 please navigate to the configuring a raid set page of gigabyte s website for instructions on configuring a raid array 21
- Connect your addressable led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 of the addressable led strip header incorrect connection may lead to the damage of the led strip 21
- D_led1 d_led2 addressable led strip headers 21
- For how to turn on off the lights of the led strip please navigate to the unique features page of gigabyte s website 21
- No pin 21
- Pin no definition 21
- Sata3 4 5 6 7 sata 6gb s connectors 21
- The headers can be used to connect a standard 5050 addressable led strip with maximum power rating of 5a 5v and maximum number of 1000 leds 21
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 21
- To enable hot plugging for the sata ports please navigate to the bios setup page of gigabyte s website and search for sata configuration for more information 21
- Follow the steps below to correctly install an m ssd in the m connector step 1 locate the m connector where you will install the m ssd use a screwdriver to unfasten the screw on the heatsink and then remove the heatsink only the m2a_cpu connector has the heatsink step 2 locate the proper mounting hole based on the length of your m ssd drive if needed move the standoff to the desired mounting hole insert the m ssd into the m connector at an angle step 3 press the m ssd down and then use the included screw to secure it in the connector remove the protective film from the bottom of the heatsink then replace the heatsink and secure it to the original hole 22
- M pcie x4 ssd m pcie x2 ssd m sata ssd 22
- M2a_cpu a a 22
- M2a_cpu m2p_sb m socket 3 connectors 22
- M2p_sb a a 22
- The m connectors on the motherboard support only m pcie ssds 22
- Types of m ssds supported by each m connector 22
- F_panel front panel header 23
- Cc1 18 d 24
- F_audio front panel audio header 24
- F_u32c usb type 24
- Gnd 14 gnd 24
- Head phone detection 24
- Head phone l 24
- Head phone r 24
- Header with usb 3 gen 2 support 24
- Mic detection 24
- No pin 24
- Pin no definition 24
- Pin no definition pin no definition 24
- Rx1 15 rx2 24
- Rx1 16 rx2 24
- Sbu1 19 d 24
- Sbu2 20 cc2 24
- Sense_send 24
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 24
- The front panel audio header supports high definition audio hd you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 24
- The header conforms to usb 3 gen 2 specification and can provide one usb port 24
- Tx1 12 tx2 24
- Tx1 13 tx2 24
- Vbus 11 vbus 24
- Vbus 17 gnd 24
- D1 18 ssrx2 25
- D1 19 vbus 25
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 25
- F_u32_1 f_u32_2 usb 3 gen 1 headers 25
- F_usb1 usb 2 1 header 25
- From the power outlet to prevent damage to the usb bracket 25
- Gnd 14 sstx2 25
- Gnd 17 ssrx2 25
- Nc 20 no pin 25
- No pin 25
- Pin no definition 25
- Pin no definition pin no definition 25
- Power 5v 25
- Ssrx1 12 d2 25
- Ssrx1 13 gnd 25
- Sstx1 15 sstx2 25
- Sstx1 16 gnd 25
- The header conforms to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 25
- The headers conform to usb 3 gen 1 and usb 2 specification and each header can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 25
- Usb dx 25
- Usb dy 25
- Vbus 11 d2 25
- Chip select 26
- Com serial port header 26
- Data input 26
- Data output 26
- No pin 26
- Pin no definition 26
- Power 3 v 26
- Spi_tpm trusted platform module header 26
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 26
- You may connect an spi tpm trusted platform module to this header 26
- Add in card 27
- Add in card connectors 27
- Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one damage to your devices may occur if the battery is 27
- Bat battery 27
- Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 27
- Of the battery the positive side should face up 27
- Or uncertain about the battery model 27
- Or use a metal object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 27
- Replace the battery 4 plug in the power cord and restart your computer 27
- Replaced with an incorrect model 27
- Supports a thunderbol 27
- Thb_c1 thb_c2 thunderbol 27
- The battery provides power to keep the values such as bios configurations date and time information in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 27
- The connectors are used to connect to a gigabyte thunderbol 27
- Used batteries must be handled in accordance with local environmental regulations 27
- When installing the battery note the orientation of the positive side and the negative side 27
- You may clear the cmos values by removing the battery 1 turn off your computer and unplug the power cord 2 gently remove the battery from the battery holder and wait for one minute 27
- Clr_cmos clear cmos jumper 28
- Rst_sw rst reset button reset jumper 28
- Qflash_plus q flash plus button 29
- Chapter 3 bios setup 30
- Function keys 31
- Startup screen 31
- 1 operating system installation 32
- Chapter 4 installing the operating system and drivers 32
- 2 drivers installation 33
- 1 configuring a raid set 34
- 1 configuringaraidset 34
- Before you begin please prepare the following items 34
- Chapter 5 appendix 34
- Raid levels 34
- Regulatory notices 35
- United states of america federal communications commission statement 35
- 2 應避免影響附近雷達系統之操作 37
- Corporation wireless module model name ax211ngw 37
- European community radio equipment directive compliance statement 37
- Japan wireless statement 5 5 ghz 帯 5 5 ghz 帯 屋内のみの使用 37
- Korea kcc ncc wireless statement 5 25ghz 5 35 ghz 대역을 사용하는 무선 장치는 실내에서만 사용하도록 제한됩니다 37
- Ncc wireless statements 無線設備警告聲明 低功率電波輻射性電機管理辦法 1 取得審驗證明之低功率射頻器材 非經核准 公司 商號或使用者均不得擅自變更頻率 加大功率或變更原設計之特 性及功能 低功率射頻器材之使用不得影響飛航安全及干擾合法通信 經發現有干擾現象時 應立即停用 並改善至 無干擾時方得繼續使用 前述合法通信 指依電信管理法規定作業之無線電通信 低功率射頻器材須忍受合法通信或 工業 科學及醫療用電波輻射性電機設備之干擾 37
- This equipment complies with all the requirements and other relevant provisions of radio equipment directive 2014 53 eu this equipment is suitable for home and office use in all the european community member states and efta member states the low band 5 5 5 5 ghz is for indoor use only 37
- Wireless module approvals wireless module manufacturer inte 37
- Contact us 38
- Gigabyte esupport 38
- To submit a technical or non technical sales marketing question please link to https esupport gigabyte com 38
Похожие устройства
- Gigabyte B660M AORUS PRO Руководство пользователя по BIOS
- Gigabyte B660M AORUS PRO Инструкция по эксплуатации
- Gigabyte B660M AORUS PRO AX Руководство пользователя по BIOS
- Gigabyte B660M AORUS PRO AX Инструкция по эксплуатации
- Gigabyte B660M AORUS PRO DDR4 Руководство пользователя по BIOS
- Gigabyte B660M AORUS PRO DDR4 Инструкция по эксплуатации
- Gigabyte B660M AORUS PRO AX DDR4 Руководство пользователя по BIOS
- Gigabyte B660M AORUS PRO AX DDR4 Инструкция по эксплуатации
- Gigabyte B660M D2H DDR4 Руководство пользователя по BIOS
- Gigabyte B660M D2H DDR4 Инструкция по эксплуатации
- Gigabyte B660M D3H DDR4 Руководство пользователя по BIOS
- Gigabyte B660M D3H DDR4 Инструкция по эксплуатации
- Gigabyte B660M DS3H AX DDR4 Руководство пользователя по BIOS
- Gigabyte B660M DS3H AX DDR4 Инструкция по эксплуатации
- Gigabyte B660M DS3H DDR4 Руководство пользователя по BIOS
- Gigabyte B660M DS3H DDR4 Инструкция по эксплуатации
- Gigabyte B660M GAMING X AX DDR4 Руководство пользователя по BIOS
- Gigabyte B660M GAMING X AX DDR4 Инструкция по эксплуатации
- Gigabyte B660M GAMING X AX Руководство пользователя по BIOS
- Gigabyte B660M GAMING X AX Инструкция по эксплуатации