Home
Главная
Bort
Лобзик электрический
BPS-580-Q
Инструкция Страница: 11

Bort BPS-580-Q [11/36] Disposal

• Prevent dust accumulation at the workplace. Dusts can

easily ignite.

• Observe correct mains voltage! The voltage of the pow-

er source must agree with the voltage specied on the

nameplate of the machine. Power tools marked with

230 V can also be operated with 220 V.

• To save energy, only switch the power tool on when

using it.

• The contact protector attached to the casing prevents

accidental touching of the saw blade during the work-

ing procedure and may not be removed.

• Before sawing in wood, particle boards, building mate-

rials etc., check for foreign objects, such as nails, screws,

etc. and remove them as required.

• Plunge cuts may only be applied to soft materials, such

as wood, gypsum board, etc. For plunge cuts, use only

short saw blades.

• The sliding shoe can prevent the surface from being

scratched. The splinter guard can prevent fraying of

the surface while sawing wood. Do not use the splinter

guard for mitre cuts.

• Adapt the settings of your power tool to the respective

application. For example, reduce the stroke rate and or-

bital action when cutting metal or for tight curved cuts.

• For long and straight cuts in thick wood (>40 mm), the

cutting line can become inaccurate. In this case, using a

circular saw is recommended to achieve accurate cuts.

• In extreme conditions, always use dust extraction as far

as possible. Blow out ventilation slots frequently and

install a portable residual current device (PRCD). When

working metals, conductive dust can settle in the inte-

rior of the power tool. The total insulation of the power

tool can be impaired.

MAINTENANCE AND CLEANING

Make sure that the machine is not live when

carrying out maintenance work on the motor.

• Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come o use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

• Lubricate the guide roller occasionally with a drop of oil.

• Should a fault occur, e.g. after wear of a part, please con-

tact your local BORT GLOBAL LIMITED dealer.

DISPOSAL

Discarded electric appliances are recyclable and

should not be discarded in the domestic waste!

Please actively support us in conserving resources

and protecting the environment by returning this

appliance to the collection centres (if available).

Made in China.

Bort BPS-580-Q [11/36] Disposal

Содержание

Похожие устройства