HYUNDAI ELECTRONICS H-CDM8042 [5/54] Detachable control panel

Din rear-mount (method 2)

Installation using the screw holes at both sides of the unit.

1. Select a position where the screw holes of the main unit are fitted for aligned, and tighten the screws at 2

positions at each sides.

Use either truss screws (5 x 8mm) or flush surface screws (4 x 8mm), depending on the shape of the screw

holes in the bracket.

2. Screw.

3. Factory radio mounting bracket.

4. Dashboard or Console.

5. Hook (Remove this parts).

Note: The mounting box, outer trim ring, and the half-sleeve are not used for this method of

installation.

Detachable control panel

Detaching the control panel

· Turn the Power off.

· Press the release button to open the panel.

· To remove the control panel, take the panel and place it under 45

according to the unit. Then draw out the

panel.