Sven ROYAL 1R [23/26] Multimedia speaker system

• Switch on the MSS by shifting the POWER switch h into the ON position, and the power LED a

on the front panel will illuminate. Then, using the INPUT AUX/PC d buttons on the remote control,

choose the system input.

• Adjust the volume level with buttons VOL+/– g on the remote control. It is also possible to set the

desired sound level with buttons VOL- (level decrease) d and VOL + (level increase) e after

pressing the function button c once, the power LED a on the front panel will illuminate green.

• Adjust the bass level with buttons BASS+/– c on the remote control. It is also possible to set the

desired bass level with buttons VOL- (level decrease) d and VOL + (level increase) e after

pressing the function button c twice, the power LED a on the front panel will illuminate orange.

• Adjust the treble level with buttons TRE+/ e on the remote control. It is also possible to set the

desired treble level with buttons VOL- (level decrease) d and VOL + (level increase) e after

pressing the function button c three times, the power LED a on the front panel will illuminate red.

• Press ST-BY (a, Fig. 3) on the remote control to temporarily turn oԚ the system. Press this

button again to turn on the system.

• Press the MUTE button b on the remote control to temporarily turn oԚ the sound. Press this

button again to turn on the sound.

• After using the MSS, mind to switch it oԚ with the POWER ON/OFF switch (c, OFF position), and

unplug the power cable j from the mains socket.

Notes:

• If you press the FUNCTION button c and hold it down for more than 3 seconds, the

system will return to the default volume and timbre settings and the sound will be

determined by the input signal only.

• Though the MSS has two audio inputs, you can turn on only one audio source at a time:

PC or AUX.

ENG

2.0 Multimedia Speaker System