Elenberg DW-9325 [14/54] After installation please put this installation manual in a safe place the content of this manual is very helpful to users who may be unfamiliar with the appliance

The dishwasher must be level for the racks to operate correctly and

to give maximum wash performance.

1. Place a spirit level on the door and the lower rack rail as shown

in diagram 1 to check that the dishwasher is level.

2. It is easy to level the dishwasher by adjusting the four leveling

legs individually from the front of the dishwasher.

2.1 Refer to Remark A diagram 2 below for adjustment of the

rear legs, turn the screw clockwise to lower the rear legs until

the correct height is obtained.

2.2 Refer to Remark B diagram 2 below adjustment of the front

legs to obtain the correct height.

3. When leveling the dishwasher please be careful not to allow the

dishwasher to tip over.

The followings should be checked before starting the dishwasher.

1. Whether the dishwasher is level and ﬁxed.

2. Whether the inlet valve is open.

3. Whether there is leakage at the connections of the conducts.

4. Whether the wires are tightly connected.

5. Whether the power is switched on.

6. Whether the inlet and drain hoses are not trapped or kinked.

7. All packing materials and documents have been removed from the

dishwasher.

AFTER INSTALLATION, PLEASE PUT THIS INSTALLATION

MANUAL IN A SAFE PLACE. THE CONTENT OF

THIS MANUAL IS VERY HELPFUL TO USERS WHO

MAY BE UNFAMILIAR WITH THE APPLIANCE.

START OF DISHWASHER