Sencor SVC 1020 CHILLI [6/12] Vacuum cleaner

Vacuum cleaner SVC 1020 Chilli ASSEMBLY Inserting the hose into the air suction hole on the vacuum cleaner Press the safety button on the hose end and insert the hose end into the air suction hole on the vacuum cleaner until you hear click The hose is now secured in the correct position Attach the holder to the telescopic tube Make sure to place the holder with the hose on the wider part of the telescopic tube Attach the floor inlet nozzle to the telescopic tube Make sure the floor nozzle is attached the narrower part of the telescopic tube Adjust the length of the telescopic tube Adjust the length of the telescopic tube as follows Move and hold the button on the tube forward in the direction of the arrows and adjust the length of the tube as required Release the button and move the tube slightly forward until you hear a click The telescopic tube is now securely fixed in position USING YOUR VACUUM CLEANER Connecting your vacuum cleaner to the electrical power mains Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the cord is out of the product Insert the plug into the power socket Caution Yellow marking on the supply cable warns that the cable is close to Its end Do not pull the cord further than the red marking Adjusting the floor inlet nozzle according to the floor surface You may set the inlet nozzle according to the floor surface by adjusting the inlet flap If you want to vacuum carpets close the bristles of the inlet inside the inlet nozzle by turning the flap accordingly If you want to vacuum hard and smooth surface move the bristles out of the nozzle by turning the flap accordingly EN 6 Copyright 2012 Fast CR a s Revision 05 2012

Скачать